just want to say hello, I bought a 13M express
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
- DOUGNASH
- Moderate User
- Posts: 299
- Joined: Thu Apr 15, 2010 7:53 am
- Location: Greenpoint, Brooklyn NY
just want to say hello, I bought a 13M express
Hi Folks
I have been a boater for over 20 years, but just bought my first Trojan.
Anybody else have a mid 80's 13M express?
Seems like lots of good people lurking arounnd here
The boat is being hauled up from FL to NY in 2 weeks.
It was a bank repo.
What can I expect from this beauty????
Once I figure out how to post pics, I will put some up.
Have a great day people!!!![/url]
I have been a boater for over 20 years, but just bought my first Trojan.
Anybody else have a mid 80's 13M express?
Seems like lots of good people lurking arounnd here
The boat is being hauled up from FL to NY in 2 weeks.
It was a bank repo.
What can I expect from this beauty????
Once I figure out how to post pics, I will put some up.
Have a great day people!!!![/url]
1985 13 Meter International Express w/ 8v71tti 462hp Detroits, 43' x 16'3"
-
- Moderate User
- Posts: 309
- Joined: Fri Dec 05, 2008 11:30 am
- Location: Presque Isle Bay, Erie, Pa.
I take it you had a survey of the boat and the engines. An engine survey is very important on that type of engine. They use dry sleeves and the fit is critical during a rebuild. When not done properly a rebuild can go wrong very fast.
The 671TI is a great engine when properly maintained. They are very noisy and most smoke alot during startup. Does yours have engine heaters? You will most likely want them.
Have you checked no load and with load WOT? Make sure the boat is not overproped. How bad are the engines leaking oil? The 671's are known for it. How bad did the engine hunt when cold started?
450HP is a lot to ask out of a 671 and is toward the upper limit of what it is capable of. Keep them maintained, do not run them real hard and KEEP THEM COOL. That last one is very important. If you do these things they will last a very long time.
I recommend you join boatdiesel as there is a wealth of info there and is well worth the $25.00 per year.
The 671TI is a great engine when properly maintained. They are very noisy and most smoke alot during startup. Does yours have engine heaters? You will most likely want them.
Have you checked no load and with load WOT? Make sure the boat is not overproped. How bad are the engines leaking oil? The 671's are known for it. How bad did the engine hunt when cold started?
450HP is a lot to ask out of a 671 and is toward the upper limit of what it is capable of. Keep them maintained, do not run them real hard and KEEP THEM COOL. That last one is very important. If you do these things they will last a very long time.
I recommend you join boatdiesel as there is a wealth of info there and is well worth the $25.00 per year.
Pretty boat - you'll love the 671s if you take care of them ...
Welcome aboard!
I too, heartily recommend http://BoatDiesel.com - $25/year and TONS of great advice, support and history.
Welcome aboard!
I too, heartily recommend http://BoatDiesel.com - $25/year and TONS of great advice, support and history.
Captain Ross, 2009 Trojan Boater of the Year
"Viva Mahia" F32 Cummins 6BTA diesels,
"Mack Attack" Chaparral 244 Fish, SeaPro 180, McKee 14, Montauk-17
"Viva Mahia" F32 Cummins 6BTA diesels,
"Mack Attack" Chaparral 244 Fish, SeaPro 180, McKee 14, Montauk-17
I've seen that boat for sale for a while. I have the 10 meter and there are several other international series owners here. They all share some common attributes. I consider RWS our resident expert on the international series.
Again, I assume you had a survey done. I believe that the 12 meters and up (May be the 11 meter) had balsa coring in the hull. You want a good hull survey and ensure that all through hulls were properly installed (Cut a larger hole and epoxy back to the size you need. I have no experience with diesels but I love the international series boats. If you ever head up towards Narragansett Bay let me know.
Welcome.
Again, I assume you had a survey done. I believe that the 12 meters and up (May be the 11 meter) had balsa coring in the hull. You want a good hull survey and ensure that all through hulls were properly installed (Cut a larger hole and epoxy back to the size you need. I have no experience with diesels but I love the international series boats. If you ever head up towards Narragansett Bay let me know.
Welcome.
- alexander38
- Ultimate User
- Posts: 3179
- Joined: Sat Sep 27, 2008 6:48 am
welcome and nice boat...
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
- RWS
- Ultimate User
- Posts: 2857
- Joined: Sat Feb 18, 2006 7:01 am
- Location: West Coast Florida
- Contact:
I've actually seen this boat.
Black Jack was originally from Punta Gorda.
Best of luck and congrats!
RWS
Black Jack was originally from Punta Gorda.
Best of luck and congrats!
RWS
1983 10 Meter SOLD after 21 years of adventures
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED
- DOUGNASH
- Moderate User
- Posts: 299
- Joined: Thu Apr 15, 2010 7:53 am
- Location: Greenpoint, Brooklyn NY
Thank you for the warm welcome
I still can't believe I have this boat coming up to NY.
It is weird how I connected with this boat.
5 years ago I had to sell my wellcraft coastal 33 w/ twin CATS to finish my house I just built. I did keep my pair of jetskis because I love the ocean so much and definitely always missed my boat.
5 years later, the house is sold, I am single again, and I wanted to get back into boating. I decided on a new leftover 08 jetboat w twin supercharged moters just to "dabble in boating" again. 2 weeks after I bought the jetboat I realized I would never be happy coming from a 33 x 13 boat.
SO I just happen to come across this boat at the right time, the broker was submitting a couple bids to the bank, so just for laughs I put in a bid a bit over asking and what do you know, I got her.
So, I re sold the jetboat (for a profit jajajaja!!!!!!) and I am just waiting for the boat to arrive.
Probably everyone on this forum will think I am crazy, but I did not get a survey done. I have always gotten surveys done on other boats , but I knew I was going to buy the boat anyway.
I purchased this boat for the wide beam and for the enjoyment of spending hours and hours and thousands and thousands to get her to a better than new state.
I know I got a good deal and a great platform to start with.
I know the bottom has to be redone.
I know I have to purchase new 4 blade props.
I have Atlantic towers ready to measure the boat for a custom hard top when it arrives in NJ.
I am sure the detroits will leak oil, I am only looking to get a couple seasons with them until I replace with bigger more efficient diesels.
I did all the work to my CATS, so I have plenty of experience.
I have 2 great danes that will be coming on board so the wide beam was very important to me.
I plan on keeping her for many years so she will be a great project.
As soon as I get her to NY, I will post some updated pics....
I still can't believe I have this boat coming up to NY.
It is weird how I connected with this boat.
5 years ago I had to sell my wellcraft coastal 33 w/ twin CATS to finish my house I just built. I did keep my pair of jetskis because I love the ocean so much and definitely always missed my boat.
5 years later, the house is sold, I am single again, and I wanted to get back into boating. I decided on a new leftover 08 jetboat w twin supercharged moters just to "dabble in boating" again. 2 weeks after I bought the jetboat I realized I would never be happy coming from a 33 x 13 boat.
SO I just happen to come across this boat at the right time, the broker was submitting a couple bids to the bank, so just for laughs I put in a bid a bit over asking and what do you know, I got her.
So, I re sold the jetboat (for a profit jajajaja!!!!!!) and I am just waiting for the boat to arrive.
Probably everyone on this forum will think I am crazy, but I did not get a survey done. I have always gotten surveys done on other boats , but I knew I was going to buy the boat anyway.
I purchased this boat for the wide beam and for the enjoyment of spending hours and hours and thousands and thousands to get her to a better than new state.
I know I got a good deal and a great platform to start with.
I know the bottom has to be redone.
I know I have to purchase new 4 blade props.
I have Atlantic towers ready to measure the boat for a custom hard top when it arrives in NJ.
I am sure the detroits will leak oil, I am only looking to get a couple seasons with them until I replace with bigger more efficient diesels.
I did all the work to my CATS, so I have plenty of experience.
I have 2 great danes that will be coming on board so the wide beam was very important to me.
I plan on keeping her for many years so she will be a great project.
As soon as I get her to NY, I will post some updated pics....
1985 13 Meter International Express w/ 8v71tti 462hp Detroits, 43' x 16'3"
- DOUGNASH
- Moderate User
- Posts: 299
- Joined: Thu Apr 15, 2010 7:53 am
- Location: Greenpoint, Brooklyn NY
oh ya, so from reading all of the above posts, it sounds like you guys know more about the boat than I do.
Can you tell me anything else about the boat.
The broker has been running the boat every couple of weeks with no real issues coming up.
I cant wait until she gets here so I can start pulling her apart!!!
LOL
Can you tell me anything else about the boat.
The broker has been running the boat every couple of weeks with no real issues coming up.
I cant wait until she gets here so I can start pulling her apart!!!
LOL
1985 13 Meter International Express w/ 8v71tti 462hp Detroits, 43' x 16'3"
-
- Moderate User
- Posts: 478
- Joined: Thu Dec 29, 2005 10:44 pm
- Location: Oriental, NC