compression fittings

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
duchess
Sporadic User
Posts: 101
Joined: Thu Jan 18, 2007 1:55 pm
Location: new jersey

compression fittings

Post by duchess »

Does anyone know where to buy the compression fittings used on the fresh water system on an 1987 f 36 ? also does anyone happen to have an old norcold 828 they re going to junk i need the T handle that keeps the 2 doors closed . thanks
Top
User avatar
Stripermann2
Ultimate User
Posts: 3027
Joined: Fri Jan 19, 2007 9:11 am
Location: Solomon's Island, MD

Post by Stripermann2 »

If you are referring to the nylon/pvc type tubing, I got some from the local hardware store. Worked fine...
Jamie


1985 F-32 270 Crusaders
1988 Sea Ray 23 350 Merc.
Trojan. Enjoy the ride...

-I don't wanna hear anyone whine...Anymore!
-You might get there before me, but you still have to wait for me, for the fun to start!
Top
Danny Bailey
Moderate User
Posts: 478
Joined: Thu Dec 29, 2005 10:44 pm
Location: Oriental, NC

Post by Danny Bailey »

I did the same thing...Pex tubing and fittings are interchangeable with what's on there.
1980 F-36 with 6BTA 250 Cummins enjoying the Sounds and coastal waters of North Carolina
Top
Mac32
Moderate User
Posts: 235
Joined: Mon Mar 12, 2007 9:29 pm
Location: Michigan
Contact:
Contact Mac32

Post by Mac32 »

Lowes had what I needed to match for repair my f32 fresh water plumbing
MAC32 "Fingers crossed for Flotation"
Image
Top
Post Reply

Return to “Trojan Boats Forum”