In the electrical panel I see 2 breakers
Left and right
The left on is not working correctly
Does anyone know where I can get a replacement
30 amp LP-3386 square deal breaker ?
I am pretty sure the power loss in the outlets is from this.
It shows nothing on the display
I am waiting for the manual so that I can really get to understand what the whole electrical panel is all about as I have no idea.
If anyone has the same boat I would welcome an idiot guide to see what's what.
Thank you
Chris
30 amp breaker
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
- Hiya Autumn
- Registered user
- Posts: 11
- Joined: Sat Nov 12, 2016 10:07 pm
- Location: Key Largo
- WayWeGo
- 2024 Gold Support
- Posts: 782
- Joined: Fri Feb 13, 2015 11:13 am
- Location: Oakton, VA / Rhode River - Chesapeake Bay
Re: 30 amp breaker
If you don't have the full documentation, you can get it for your boat from Beacon Marine. You provide them with the serial number of your boat and you get a copy of what Trojan gave the original owner. The info is here -- http://www.trojanboats.net/wforum/viewt ... f=1&t=2695
We were lucky and our boat came with the full set of original documents, but that is not common...
We were lucky and our boat came with the full set of original documents, but that is not common...
1975 F-36 Convertible
Twin Chrysler 440's
Twin Chrysler 440's
- Hiya Autumn
- Registered user
- Posts: 11
- Joined: Sat Nov 12, 2016 10:07 pm
- Location: Key Largo
Re: 30 amp breaker
Thank you
I sent for it yesterday
I sent for it yesterday
- P-Dogg
- Active User
- Posts: 961
- Joined: Wed Jun 22, 2011 7:15 pm
- Location: Near Baltimorgue, Murderland, where they prove every day that gun control doesn't work.
Re: 30 amp breaker
Welcome to the forum. I searched
http://www.homedepot.com/p/Square-D-QO- ... /100022140.......
This forum also has a search feature.
on the interwebs and it immediately returned:30 amp LP-3386 square
http://www.homedepot.com/p/Square-D-QO- ... /100022140.......
This forum also has a search feature.
I needed a less expensive hobby, so I bought a boat!
-
- 2024 Gold Support
- Posts: 1871
- Joined: Mon Sep 28, 2009 5:08 pm
- Location: Canton, TX Boat on TEXOMA
Re: 30 amp breaker
My f28 used hart breakers which were bought by Seimans and Home Depot has seimans breakers that fit perfectly. The breaker boxes were standard household type not specifically marine.
Larry Eddington
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
- prowlersfish
- 2024 Gold Support
- Posts: 12664
- Joined: Sat Nov 05, 2005 6:56 pm
- Location: Lower Chesapeake Bay ,Va
Re: 30 amp breaker
Chris are you using both shore power cords ? I am assuming you have twin 30 amp service . If just using one cord there is a cross over switch (Never ever flip it when 2 cords are hooked up ) My F36 uses a Marine main breaker , it mounts differently then a home type .Other breakers in the panel are the home style . This seems to vary from model to model year to year . Have you found out , exactly what Trojan you have ? Photo of the panel (and boat) would helpHiya Autumn wrote:In the electrical panel I see 2 breakers
Left and right
The left on is not working correctly
Does anyone know where I can get a replacement
30 amp LP-3386 square deal breaker ?
I am pretty sure the power loss in the outlets is from this.
It shows nothing on the display
I am waiting for the manual so that I can really get to understand what the whole electrical panel is all about as I have no idea.
If anyone has the same boat I would welcome an idiot guide to see what's what.
Thank you
Chris
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat
- Hiya Autumn
- Registered user
- Posts: 11
- Joined: Sat Nov 12, 2016 10:07 pm
- Location: Key Largo
Re: 30 amp breaker
thank you for the guidance with the breaker
I sourced the breaker from grainger, changed it out all works fine
changed out the bilge pump switch today . good job
and also ripped out all the old carpet .
found so many hatches underneath the carpet some don't look original but will investigate anyway.
Still got issues with the windlass..............basically it doesn't work.
I had a chap look at it and he said it needs new everything.
So the next job I think I will change the switch, find any solenoids and clean up all the connections and hope that does the trick as really don't know what else to do.
Anyway everything seems ok ,
I will get some photos and post them up
Happy Thanksgiving to all
I sourced the breaker from grainger, changed it out all works fine
changed out the bilge pump switch today . good job
and also ripped out all the old carpet .
found so many hatches underneath the carpet some don't look original but will investigate anyway.
Still got issues with the windlass..............basically it doesn't work.
I had a chap look at it and he said it needs new everything.
So the next job I think I will change the switch, find any solenoids and clean up all the connections and hope that does the trick as really don't know what else to do.
Anyway everything seems ok ,
I will get some photos and post them up
Happy Thanksgiving to all