Re: F25 bilge blower
Posted: Thu May 16, 2013 9:23 pm
My fridge is on the port side. It's a reach - thru. The compressor is on the starboard side by the helm behind the forward vent. Still works real good too.
*THE* forum for active Trojan Boaters...
http://www.trojanboats.net/wforum/
Found the blower and after cleaning some wires it puurrss like a happy kitten . Still not sure if its holding tank or overboard discharge for toilet . Got busy with few other things on , like taking of metal end caps on exhaust manifold and trying take off broken rusted in bolts for caps.Big D wrote:I agree with above; First pic is fridge compressor; common set up years ago. Second pic is diverter for toilet to pump into waste holding tank or overboard. Third pic is deck fitting where you would pump out the waste holding tank at a pump out station. You should be able to purchase a screw-in cover for it. Check the size, there are a few different standards. Blower; follow the white vent hose from one end to the other.