Trojan Boat Forum

Anyone know where I can find replacement cleats for a 77 F32? They are 9" long, brass and mount with two bolts.

Any help would be appreciated.

Ken

I think you need a 10" cleat

http://www.buckalgonquin.com/pages/Prod ... leats.html

I think these are as close as you will get. also you may try bob here at trojanboats.net or marine tech

if not I would just refit a difrent type cleat. ( I did )

Yep. Call John at Marine Tech. Needed them for my brother's 77 F32.

They are actually longer and they cut them down and polish them to the original size. Only way I know of, to get them. Good luck.

717-684-4145

I replaced all of my cleats with the following, really looks good on the boat!!