Page 1 of 1

10.8M Windlass Suggestions

Posted: Mon Jan 24, 2022 2:16 pm
by Lucky7
Hello Everyone,

I would like to add a windlass to my 10.8M International. Obviously, I would like to utilize the hole that is already in the deck for the anchor chain. Can anyone recommend a windlass brand and model number? If you have pictures showing how yours is mounted it would also be appreciated.

Thank you,
Ron

Re: 10.8M Windlass Suggestions

Posted: Mon Jan 24, 2022 10:14 pm
by prowlersfish
bow%20puplit.jpeg
bow%20puplit.jpeg (33.25 KiB) Viewed 3909 times
Good makes a great windlass. I am using a Lemar pro1000 on my F36

Re: 10.8M Windlass Suggestions

Posted: Tue Jan 25, 2022 5:41 am
by RWS
I sent my measurements to TOM RING at Good Windlass

we put together a great setup

beat the hell out of my old Lewmar freefall

We also moved the windlass aft a bit so the rode would dump into a deeper part of the anchor locker.

We modified the anchor locker door to accomplish this .

I have posted photos here on the Forum previously, suggest you do a search.

My new to me Sea Ray 450DA has a Lofrans windlass. Should it fail, I'll be calling Tom Ring for a GOOD windlass.

BEST !

RWS

Re: 10.8M Windlass Suggestions

Posted: Tue Jan 25, 2022 9:57 am
by El L Sea
We use a Lewmar ProFish 1000
20191113_111555.jpg
20191113_111555.jpg (93.66 KiB) Viewed 3903 times

Re: 10.8M Windlass Suggestions

Posted: Tue Jan 25, 2022 6:19 pm
by rickalan35
Hi Ron,

I own a 1994 Trojan 370 Express, one of those orphan Carver-assembled Trojan's after Carver bought the remains of the Trojan bankruptcy.

My boat has a Maxwell VWC windlass that works well. I'm replying essentially because of the similarity in our hull shapes.

I dealt with the American offices of Maxwell recently in order to obtain a replacement Clutch Nut Lever and experienced excellent communication and service. (When I originally bought the boat I had said, "What the hell's this thing old thing." .... and heaved the original lever into the garbage.)

Good luck with your purchase whatever you choose.

Ron, a lot of people have moved over to the Facebook Trojan website. I do go there but I really miss the regulars here. Times change I guess.

El Sea, I was in Fort Myers this past November and made a point of dropping down to MarineMax to see if your boat was still there. It was great to see it again and to see how far ahead Trojan was at the time. Hope all is well. I'm back now in Canada in a deep freeze. Spring can't come soon enough.

RWS......... The profile of that fabulous SeaRay 450DA you bought always reminds me of those original Trojan 13 meter hardtops ...... one I examined closely and seriously considered buying back in 2011. I believe when sold it was moved to Florida.

Cheers, Mates

Re: 10.8M Windlass Suggestions

Posted: Tue Jan 25, 2022 7:47 pm
by Lucky7
Thanks for the great advice everyone. I am reviewing each post carefully as they are all full of great content.

Ron

Re: 10.8M Windlass Suggestions

Posted: Wed Jan 26, 2022 6:45 am
by RWS
THANKS for the compliments !

One of the advantages of the GOOD windlass is there is NO NEED to go forward and clip off/on the safety lanyard.

It's a positive locking mechanism.

I LOVE that feature.

RWS