Engine cooling
Posted: Tue Jan 09, 2024 3:40 pm
When you have tried new impeller, thermostat risers, elbows, thru hull clogged, exchanger and still can’t find the reason for the engine overheating check your hoses for a collapsed hose.
Also here is the Crusader cooling test check.
Closed system
10 to 15 degrees higher then water going into exchanger
Using. 5 gal bucket
Water going into exchanger should fill a bucket in 20 sec at 2500 RPMs
Same going out of exchanger.
Also here is the Crusader cooling test check.
Closed system
10 to 15 degrees higher then water going into exchanger
Using. 5 gal bucket
Water going into exchanger should fill a bucket in 20 sec at 2500 RPMs
Same going out of exchanger.