Engine cooling

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
BeaconMarineBob
Beacon Bob
Beacon Bob
Posts: 275
Joined: Thu Aug 06, 2009 6:39 pm
Location: Easton, PA
Contact:
Contact BeaconMarineBob

Engine cooling

Post by BeaconMarineBob »

When you have tried new impeller, thermostat risers, elbows, thru hull clogged, exchanger and still can’t find the reason for the engine overheating check your hoses for a collapsed hose.

Also here is the Crusader cooling test check.

Closed system
10 to 15 degrees higher then water going into exchanger

Using. 5 gal bucket
Water going into exchanger should fill a bucket in 20 sec at 2500 RPMs

Same going out of exchanger.
Attachments
IMG_7499.jpeg
IMG_7499.jpeg (94.35 KiB) Viewed 57608 times
Bob Cushman, Owner
Beacon Marine Supply
Bob@BeaconMarineSupply.com
(609)713-4602
~ Please Contribute to the Forum ~
Top
Post Reply

Return to “Trojan Boats Forum”