Port engine wont start from bridge.Upper and Lower buzzers dont work

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
User avatar
Martino
Registered user
Posts: 79
Joined: Sat Dec 02, 2017 8:07 am
Location: Detroit Michigan

Port engine wont start from bridge.Upper and Lower buzzers dont work

Post by Martino »

In my 1980 F32 with new Chrysler 360 engines the port engine wont start from bridge. And the buzzers on the bridge and in the cabin dont work. I did replace the ignition switch on the bridge last year and it started. Now it dont.
Any help or suggestions would be greatly apprieciated.
User avatar
prowlersfish
2024 Gold Support
2024 Gold Support
Posts: 12707
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: Port engine wont start from bridge.Upper and Lower buzzers dont work

Post by prowlersfish »

Are the gauges coming on when you turn the switch on? Are the buzzers not working from both switches or just the upper? check for lose connections Check to see if you're getting power to the switch. if you do check if you are getting power out.
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
User avatar
Martino
Registered user
Posts: 79
Joined: Sat Dec 02, 2017 8:07 am
Location: Detroit Michigan

Re: Port engine wont start from bridge.Upper and Lower buzzers dont work

Post by Martino »

prowlersfish wrote: Tue Jul 23, 2024 9:15 am Are the gauges coming on when you turn the switch on? Are the buzzers not working from both switches or just the upper? check for lose connections Check to see if you're getting power to the switch. if you do check if you are getting power out.
Yes, the gauges come on and the buzzers dont work for both switchwes. I will investigate the power to the switch.
User avatar
Martino
Registered user
Posts: 79
Joined: Sat Dec 02, 2017 8:07 am
Location: Detroit Michigan

Re: Port engine wont start from bridge.Upper and Lower buzzers dont work

Post by Martino »

Martino wrote: Tue Jul 23, 2024 9:57 am
prowlersfish wrote: Tue Jul 23, 2024 9:15 am Are the gauges coming on when you turn the switch on? Are the buzzers not working from both switches or just the upper? check for lose connections Check to see if you're getting power to the switch. if you do check if you are getting power out.
Yes, the gauges come on and the buzzers don't work for both switches. I will investigate the power to the switch.
So the ignition switch on the bridge had a loose power wire. Now I need to figure out why the lower and upper helm buzzers don't work.
User avatar
prowlersfish
2024 Gold Support
2024 Gold Support
Posts: 12707
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: Port engine wont start from bridge.Upper and Lower buzzers dont work

Post by prowlersfish »

Check for power at the buzzer(s) and check to make sure the wire is hooked up to the oil and temp switches. (not sensors)
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
User avatar
Martino
Registered user
Posts: 79
Joined: Sat Dec 02, 2017 8:07 am
Location: Detroit Michigan

Re: Port engine wont start from bridge.Upper and Lower buzzers dont work

Post by Martino »

prowlersfish wrote: Wed Jul 24, 2024 11:27 am Check for power at the buzzer(s) and check to make sure the wire is hooked up to the oil and temp switches. (not sensors)
I didnt know about the oil and temp switches? I did notice one of the buzzers has the top piece removed from the lower half.
User avatar
Moderator
2024 Gold Support
2024 Gold Support
Posts: 306
Joined: Sun Feb 21, 2010 11:48 am
Location: Could be anywhere
Contact:

Re: Port engine wont start from bridge.Upper and Lower buzzers dont work

Post by Moderator »

Martino wrote: Wed Jul 24, 2024 1:56 pm
prowlersfish wrote: Wed Jul 24, 2024 11:27 am Check for power at the buzzer(s) and check to make sure the wire is hooked up to the oil and temp switches. (not sensors)
I didnt know about the oil and temp switches? I did notice one of the buzzers has the top piece removed from the lower half.
They have buzzers in the Trojan store if you need one.
Moderator

Helping keep Trojan Yachts alive .
Forum Moderator
TrojanBoats.Net
Trojan Boater
User avatar
Martino
Registered user
Posts: 79
Joined: Sat Dec 02, 2017 8:07 am
Location: Detroit Michigan

Re: Port engine wont start from bridge.Upper and Lower buzzers dont work

Post by Martino »

Moderator wrote: Fri Jul 26, 2024 7:44 am
Martino wrote: Wed Jul 24, 2024 1:56 pm
prowlersfish wrote: Wed Jul 24, 2024 11:27 am Check for power at the buzzer(s) and check to make sure the wire is hooked up to the oil and temp switches. (not sensors)
I didnt know about the oil and temp switches? I did notice one of the buzzers has the top piece removed from the lower half.
They have buzzers in the Trojan store if you need one

Going to check the wires and connections on the senders.
Attachments
oil sender and switch.JPG
oil sender and switch.JPG (66.86 KiB) Viewed 6455 times
Post Reply