Page 1 of 1
Ordering International logo
Posted: Fri Oct 24, 2008 7:29 pm
by Wes
Hi all,
I have put together samples to take to my metal shop guy for pricing. If anyone is interested in any sets let me know. I'm not in any hurry but I'd like to have the pieces produced before next March so I can install them before the boat goes back in the water.
Wes
[/url]
Posted: Fri Oct 24, 2008 9:38 pm
by RWS
i'd like one of the "helmet" if possible.
Posted: Sat Oct 25, 2008 8:18 am
by tgcasey
I am interested in a set, I have 12M International....
12 meter
Posted: Sat Oct 25, 2008 10:31 am
by Wes
I'll see if he can change the "10" to a "12". Are you interested in 1 or 2?
Posted: Mon Oct 27, 2008 12:39 pm
by tgcasey
I have 1987 12M convertible these are the same one correct? If so I would be interested in a complete set, depending upon price of course...
Thanks
Tom
Tomorrow
Posted: Mon Oct 27, 2008 5:43 pm
by Wes
I'm going to the machine shop tomorrow. When I get a price for the individual parts, I'll post them. Do you have the "12 meter" logo?
Wes
Posted: Mon Oct 27, 2008 8:23 pm
by tgcasey
My boat has all the logos but they are all in pretty bad shape...
Tom
Posted: Mon Oct 27, 2008 8:27 pm
by Wes
Hi Tom,
I don't know when they'll have a price for the parts but I'll get everything posted when I get them. It has been quite an adventure getting the parts assembled since we didn't have anything on our boat. I even talked a friend of mine, 2 slips away, into letting me take the helmet off his boat for the machine shop to scan.
Wes
VINYL
Posted: Sun Nov 02, 2008 8:41 pm
by Obaby
If interested, I had a boat sign maker create those emblems in vinyl. There exactly the same..(mine says 11 meter) I even powedcoated my old emblems but they lasted just 2 years... Vinyl works just fine !!
It's to dark tonight to get a good picture off my boat.. but if interested LMK if you want a picture.
I'll put you in direct contact with the lady, she's great !
Patrick
Posted: Fri Nov 28, 2008 4:51 pm
by gardnersf
I'm interested in a full set of 10 meter logos. Mine are pretty pitted.
Posted: Fri Nov 28, 2008 8:07 pm
by Wes
Hi gardnersf,
As soon as the machine shop gets back to me I'll post the prices. I told them that at my age I'm in no rush and with all the other projects I have to do on the boat I'll be pretty busy for a while.
I did tell them that I wanted to get this finished before Spring. They told me they'd get prices to me before Christmas. They want to do research and get the work done right. They don't want the logos to disintegrate after 1 season on salt water.
Posted: Fri Nov 28, 2008 9:05 pm
by gardnersf
SOunds great, let me know when.