Page 1 of 1
Chrysler 318 belts
Posted: Sat May 05, 2012 12:16 pm
by bkwesq
Can anyone tell me what size belts I need for water pump and alternator?
Thanks much
Posted: Sat May 05, 2012 12:29 pm
by jefflaw35
mine has a Gates 7460 (11a1170) 3/8 X 46-5/8 (9.5/10 mm X 1185mm)
Posted: Sat May 05, 2012 2:34 pm
by jefflaw35
after grabing a spare belt and giving you the numbers, I scratched my head and uncovered my motors. I apologize! I forgot that I removed my altenator and belt. The other belt I have is. Gates 7425 (11a1080) you should be able to cross reference the belt companies. 3/8 X 43- 1/2 (9.5/10 mm X 1095 mm) sorry about that. I have to much crap laying around.
Posted: Sun May 06, 2012 8:51 am
by bkwesq
Ok thank you !
Posted: Sun May 06, 2012 6:11 pm
by jefflaw35
your welcome! let me know what you come up with for a brand. Im not sure if Gates is good or not. Just found them laying in a drawer in the cabin and they were matched to the ones being used on the motor.
Posted: Mon May 07, 2012 4:06 pm
by bkwesq
i went to Auto Zone and gave the numbers and the kid couldnt find it on the computer so he guessed...not so good. I will call around today and let you know what i find out. I'm 10 months in to the project and just scheduled the splash down for 6/8!!!! gotta get done now!