F32 prop shafts

phasev · Post by **phasev** » Thu May 10, 2012 6:55 pm

I have owned a F32 since 1979 with 318 Chrysler power. My prop shafts have a diameter 1-1/4". I found a guy trying to sell his spare set on the web with the same power but he claims his props are for 1-1/2" shaft. Did Trojan have two different diameter shafts for the same boat with the same power??

captainmaniac · Post by **captainmaniac** » Thu May 10, 2012 9:00 pm

Not to my knowledge. Mine are 1 1/4" too.

Stripermann2 · Post by **Stripermann2** » Fri May 11, 2012 8:59 am

Doesn't sound right. Even the stock F36 shafts are 1-3/8" At least on my buddy's 1981 model, they are. 1-1/2" are large.

gettaway · Post by **gettaway** » Fri May 11, 2012 10:17 am

Maybe the guy used a tape or ruler to measure and got it wrong, see if he can put a set of calipers on it and measure the shaft

gettaway · Post by **gettaway** » Fri May 11, 2012 10:19 am

sorry read your post wrong, I was thinking you were looking for a set of shafts not prop, if it is the props, the prop size should be stamped on the hub somewhere

rossjo · Post by **rossjo** » Fri May 11, 2012 11:18 am

1-1/4" STOCK 1974 F32 shafts here.