old gauges

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

User avatar
K4282
Moderate User
Posts: 355
Joined: Thu Dec 27, 2012 2:12 pm
Location: Bullock Cove, RI

old gauges

Post by K4282 »

Looking for a fuel gauge for lower helm, 1974 F32, faria gauge, someone changed one of mine and it looks stupid next to all the originals, I have a questionable tach too if theirs and parts lying around, thanks
User avatar
prowlersfish
2024 Gold Support
2024 Gold Support
Posts: 12697
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: old gauges

Post by prowlersfish »

You could try Beacon marine for oem gauges ,also look at Gauges.com they carry Faria
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
User avatar
AwayOnBusine$$
Moderate User
Posts: 240
Joined: Sat May 09, 2015 5:53 pm
Location: 75 F32 Lake Simcoe Ontario

Re: old gauges

Post by AwayOnBusine$$ »

Can you post a picture of your guages. May have some.
F32 Fly 1975
User avatar
g36
Moderate User
Posts: 713
Joined: Tue Sep 11, 2007 8:24 am
Location: soddy daisy, tennessee

Re: old gauges

Post by g36 »

I believe I have a whole set of oem guage that were removed from a friend's f32 I may can help also
1997 CARVER 405
"the BLACK PEARL"

past fleet
1978 F32 SEDAN CHRYSLER 318's

current fleet
1997 seadoo gts
1997 yamaha wave venture
1985 sunbird 18 ft runabout
1968 coronado sailboat 25 ft
sunfish
14' hobie cat
canoe
8ft portabote
User avatar
captainmaniac
2024 Gold Support
2024 Gold Support
Posts: 1922
Joined: Sat Apr 30, 2005 10:26 pm
Location: Burlington, Ontario

Re: old gauges

Post by captainmaniac »

I didn't think original gauges were Faria... On my '79 they were DetMar.
larryeddington
2024 Gold Support
2024 Gold Support
Posts: 1876
Joined: Mon Sep 28, 2009 5:08 pm
Location: Canton, TX Boat on TEXOMA

Re: old gauges

Post by larryeddington »

I think most of our boats came with Delco Gauges, not available today but there are vintage gauge copies on the internet.
Larry Eddington
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
larryeddington
2024 Gold Support
2024 Gold Support
Posts: 1876
Joined: Mon Sep 28, 2009 5:08 pm
Location: Canton, TX Boat on TEXOMA

Re: old gauges

Post by larryeddington »

I think most of our boats came with Delco Gauges, not available today but there are vintage gauge copies on the internet.
Larry Eddington
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
mikeandanne
Moderate User
Posts: 628
Joined: Sun Sep 09, 2012 11:30 am

Re: old gauges

Post by mikeandanne »

larryeddington wrote:I think most of our boats came with Delco Gauges, not available today but there are vintage gauge copies on the internet.
+ 1... all the originals on the 78 F 32, were AC Delco
User avatar
K4282
Moderate User
Posts: 355
Joined: Thu Dec 27, 2012 2:12 pm
Location: Bullock Cove, RI

Re: old gauges

Post by K4282 »

This is what I have, havent found them on Beacons page, any information would be helpful
Image
Image

Image
Last edited by K4282 on Fri Sep 09, 2016 3:44 pm, edited 1 time in total.
larryeddington
2024 Gold Support
2024 Gold Support
Posts: 1876
Joined: Mon Sep 28, 2009 5:08 pm
Location: Canton, TX Boat on TEXOMA

Re: old gauges

Post by larryeddington »

Looks like I can read AC Spark Plug which I believe are Delco on some of them.
Larry Eddington
1984 F-36 Tri Cabin "The Phoenix II"
1978 F-28 "The Phoenix"
Fish Master 2350 Bay Boat
9.5' Dink
User avatar
K4282
Moderate User
Posts: 355
Joined: Thu Dec 27, 2012 2:12 pm
Location: Bullock Cove, RI

Re: old gauges

Post by K4282 »

wow, you guys are better than me, and they sure look dirty blown up in a picture lol, i need to get to cleaning
User avatar
captainmaniac
2024 Gold Support
2024 Gold Support
Posts: 1922
Joined: Sat Apr 30, 2005 10:26 pm
Location: Burlington, Ontario

Re: old gauges

Post by captainmaniac »

Agree re the AC Spark Plug labeling. Looks like the tachs were swapped out for Faria at some point. These are definitely different than what I had in my '79.
User avatar
g36
Moderate User
Posts: 713
Joined: Tue Sep 11, 2007 8:24 am
Location: soddy daisy, tennessee

Re: old gauges

Post by g36 »

I never heard from you but i posted earlier about oem guages are you interested or I don't need to worry about it
1997 CARVER 405
"the BLACK PEARL"

past fleet
1978 F32 SEDAN CHRYSLER 318's

current fleet
1997 seadoo gts
1997 yamaha wave venture
1985 sunbird 18 ft runabout
1968 coronado sailboat 25 ft
sunfish
14' hobie cat
canoe
8ft portabote
mike0469
Registered user
Posts: 26
Joined: Sat Nov 21, 2015 9:31 pm

Re: old gauges

Post by mike0469 »

Take a look at this supplier; see if you can get a close match.

http://www.newvintageusa.com/performance.html
User avatar
K4282
Moderate User
Posts: 355
Joined: Thu Dec 27, 2012 2:12 pm
Location: Bullock Cove, RI

Re: old gauges

Post by K4282 »

g36 wrote:I never heard from you but i posted earlier about oem guages are you interested or I don't need to worry about it
yes please, I will gladly pay, sorry I havent been very active on this page and have been trying to squeeze in allot of boating
Post Reply