prowlersfish wrote:Keep turning the wheel back and forth make sure you have plenty of fld in the tank . I can email you the install instructions if you need them tells how to bleed it
Search found 4 matches
- Mon Jul 20, 2009 11:04 pm
- Forum: Trojan Boats Forum
- Topic: hydraulic steering helm 87 mid cabin
- Replies: 4
- Views: 2289
Would very much appreciate the manual.
- Mon Jul 20, 2009 10:52 pm
- Forum: Trojan Boats Forum
- Topic: hydraulic steering helm 87 mid cabin
- Replies: 4
- Views: 2289
steering 87 mid cabin
Thanks, I turned the wheel in each direction more than 10 times 1/2 rotation each time with no luck. I am going to take the middle/skinny line off the fitting which I think is the bleed (3 line system) and see if I can bleed it that way. Do you know if I should see fluid coming from this line as the...
- Mon Jul 20, 2009 5:08 pm
- Forum: Trojan Boats Forum
- Topic: How many 10 Meter Midcabin owners?
- Replies: 18
- Views: 9014
Just picked up 87 mid cabin
Add me to the list of owners with this type. The vessel I picked up is a project boat. I have 2 454 crusaders 600 hours. Just finished new valve job on Port side. Had bent push rods and stuck valves. Had fuel problem before that now I have a steering problem that brought me to this forum. Looks like...
- Mon Jul 20, 2009 4:14 pm
- Forum: Trojan Boats Forum
- Topic: hydraulic steering helm 87 mid cabin
- Replies: 4
- Views: 2289
hydraulic steering helm 87 mid cabin
I recently bought this project boat that I am in the processing of bringing back to life. I had a fluid leak due to a broken seal. I removed the wheel and the lines took apart the helm and replaced the seal. When everything was back together I confirmed the lines were holding 15psi but the steering ...