Trojan Boat Forum

The specs for the Trojan F26 are:
LOA = 26' 4"
Beam = 10'
Draft = 27"
Weight = 5,450 lbs
Fuel = 75 gal
Water = 20 gal

I replaced my 1977 F26 Chrysler 318 (225 HP) with a Chrysler 360 (260 HP). The transmission is still 1:1 however it changed from the Velvet Drive to a ZF-Hurth. In neutral the engine will rev to 5,000 RPMs however in forward gear the engine only gets to 4,000 RPMs. My sea trail results are knots per...

I replaced my 1977 F26 Chrysler 318 (225 HP) with a Chrysler 360 (260 HP). The transmission is still 1:1 however it changed from the Velvet Drive to a ZF-Hurth. In neutral the engine will rev to 5,000 RPMs however in forward gear the engine only gets to 4,000 RPMs. My sea trail results are knots per...

I am embarrassed to say that it was buried in the city dump in September 2009.

I am restoring a 1977 F26 and have removed the flybridge. The folding ladder is in good condition and posted on ebay.

I am happy to answer your questions and send photos.

Michael

The original Chrysler 318 was right-hand. The Chrysler 360 is left-hand. The prop size that seems to be common for the F26 is 14x10. The 14 inch diameter gives me about 1.5" clearance between blade tips and the underside of the hull. A 15" prop is tempting however I don't want to overtorqu...

I am restoring a 1977 F26 and have installed a Chrysler 360 with a 1:1 transmission. My first sea trial with a 13x9 Dyna-Jet prop was not impressive therefore I am looking for recommendations on a more appropriate prop. I have the Owner's Manual for my hull number and would appreciate any other docu...

I am restoring a 1977 F26 and would like to know about your engine, transmission, and propeller. What is your setup and what is your speed at 2000, 3000, and 4000 rpm's? I replaced the original Chrysler 318 with a Chrysler 360. My transmission is still 1:1. My first sea trial was with a 13x9 Dyna-Je...

Please call if this prop is still for sale.
Thank you.
Michael
321-917-5314

I would like to get your prop and try it on my boat. Please call Michael at 321-917-5314.
Thank you.
Michael

I am restoring a 1977 F26 and have removed the flybridge. The folding ladder is in good condition.
$200 plus shipping costs from Florida, or best offer.

I am happy to answer your questions and send photos.

Michael