Trojan Boat Forum

I am trying to track down the curved plastic engine room vents on the back of the cabins on the internationals. The plastic under the metal is cracking pretty badly and I would like to replace them I can find new ones. thanks for any help

I tried switching the breaker next to it with the same problem, both 10 amps. I do not have any pictures right now of the pump or wiring and the pump is really tough to access without pulling the aft deck up so I'll work with tough accessb to figure it out. The breakers are 10 amp pr11-2-10.00a-xx p...

Bringing the boat back to southern md in 2 weeks and went to do some work on it to get ready for the trip. The aft breaker trips after the bilge pump runs for 5-10 seconds. I first tried to switch the beaker and switch same result, I the replaced the pump and disconnected all floats same results. Th...

IS the rotella your recommending the HD 15W-40 that states for diesel engines? and does it matter if I use dextron 2 or 3? thanks for the help.

My engines are 1987's so your saying I shouldn't use 10w-30?

Going to change the oil in the engines and reduction gear of the boat this weekend and wanted to hear what others are using. Boat has the Crusader 454 engines, I'm assuming most everyone uses 10w-30? I think the reduction gears are Borg warner? what type of oil does everyone use in them. I believe w...

I sold a 85 34C and bought a 10.8 Trojan a month ago.. both are good boats I feel that I upgraded a bit but have some work to do. Be sure to check out the silverton forum as well I found some good info on there.

What RPM should I expect to get out of the engines on this hull? if I was to have the props looked at what pitch/size should they be?

I settled the deal on a 10.8 flybridge / hardtop ive been looking at. Im sure ill be asking for help tracking down parts and picking your brains for knowledge. On the power trial today not a perfectly clean bottom 3500 port just pver 3000 stbd. Thinking/hoping its a throttle adjustment. Some items n...

I settled the deal on a 10.8 flybridge / hardtop ive been looking at. Im sure ill be asking for help tracking down parts and picking your brains for knowledge. On the power trial today not a perfectly clean bottom 3500 port just pver 3000 stbd. Thinking/hoping its a throttle adjustment. Some items n...

I would also like to get a roundabout GPH fuel burn at "cruising" speed and what RPM's others are cruising at with similar boat? Thanks again!

I am about to pull the trigger on an 87 10.8 international sedan flybridge/hardtop and have A few question for experienced owners. The boat appears to be in good shape but I am a bit concerned about 1500 hours on the 454 engines. I dont know if the risers were ever changed but heard rumor that they ...