Trojan Boat Forum

I'm struggling trying to locate good part numbers for a screw down cap and rotor for ccw port side lm 318 with an updated ignition system

Steve

Has anybody had any experience with adding a kicker engine . Mounting bracket etc I don't want to cut my swim platform . Was thinking of a sliding mount .

Adjusted timing with vac Guage to 20hg , readjusted carb . Problem solved. Thanks

I'm having trouble with the port engine, when hot the engine will shut down the closer you get base idle and occasionally pop through the intake under acceleration , I'm wondering about coil breaking down or timing advance issues, any ideas.

Steve

Can anyone suggest a good cleaning solution, I don't want to make it any worse.

Steve

The aluminum trim around my fly bridge is looking a little bit ratty , does anyone have any experience with the product sold in the online store. The product pic on line isn't clear.

Steve

Thanks again I found the article.
Steve

Does anyone have a link to instructions . I have read something about this topic before and can't find it again. Prowler fish probably.

Steve

Hey thanks.

Any advice on adjusting both engines , both shafts are real close to the through hull tubes.
Their is no vibration at all and I'm concerned about making a bigger problem. I've read flange to flange is 1 to .003 . In or out of the water.

Ya I've got twins with a very old starboard engine and I'm looking for a scrap boat or used engine for overhaul with a single , without disabling my boat.
Theirs lot's of 26 ' & 28' boats around here .
Steve

Does any one know whitch engine is used in a single shaft boat , my starboard engine needs overhaul I'd like to buy a used one not both.
Steve

That's a great idea , yes please send pic's
Steve

Yes I have , can't seem to get a break with this request.

I've got same vintage , do they have a common fuel tank obviously the condition is related to both locate the common fault likely fuel restriction , or tank venting , not vac advance , advance is directly related to engine speed not engine load. What other info do you have.