Trojan Boat Forum

looking for the correct intake manifold gaskets for a 78 318.

and if i go with the 1409 what is the matching flame arrestor that has the proper hose fittings on it?

what's the difference between the Edelbrock 1409 and the 1406?

prowlersfish wrote: ↑Tue Nov 10, 2020 5:56 pm

hammerhead wrote: ↑Sun Nov 08, 2020 3:23 pm f30 with 318's . will post video later

Did you post it on face book ?

yes i did

f30 with 318's . will post video later

had boat pulled and winterized and noticed that the port prop was spinning when in neutral and at idle. what to do?

i have a 79 f30 and want to change out the back lights because most dont work. the are the original gauges and i cant seem to find leds for it. any help would be greatly appreciated

how hard would it be to find a trailer that would work for a F 30. how would you be able to tell if it fits correctly

i just installed new pertronix distributors and blaster coils. bypass all the chrysler ignition junk. runs so much better

how did you wire them up?. i got the same distributor and framethrower coil but no wireing instructions

do you have a link to the distributor you bought? looking to replace mine on our 318's as well

looking to replace the old distributors on f30. both motors are 318's is this the direct replacements.

PerTronix Flame-Thrower Plug and Play Marine Distributors with Ignitor II® Module D241801

Lets look back to your past posts in 2018 about the carb problems.Seems like you still have the same problem. Start with a basic tune up and compression test. You haven't said anything about what other work has been done. On my 1981 F32 the fuel pickups had No screens just 8" of copper tube an...

Just a follow up. we rebuild the carbs and they were way out of adjustment.fuel pressure was at 6 lbs on the port and 4 on the starboard. electric pumps. the pick up tube in the port was 1/2 copper and the starboard was 3/8 rubber hose. also the pumps were installed right at the tank. what size shou...

If Psfish has direct experience on your model of boat, ill defer, but as an engineer, id never install a filter in an inaccessible location. Now what boat / engines do you have ? your max rpm and speed ? 1977 f-30 with twin 318's port rpms 1800 star 2100. to speed 19 mph. all new filters and water ...