Trojan Boat Forum

I am in the gulf coast area of Ala and i am thinking of getting a trailer for my 1976-F26 boat.
Does anyone know of a company that makes a trailer for this boat.
Due to the oil spill the waters where i store my boat are closed to recreational boating.

Thank you all for the info. It tell me almost all the info I needed, the only thing left I need to know is the balance point of the boat for an approximate setting of the exile on a trailer.
Thank you.

I own a 1976 F26 and due to registration issues, i need a copy of the factory specifaction sheet showing the actual length, not just the designated length.
Thank you

Sea Ya I own a 1976 F26 with a 350 mercruiser. I talked to a number of prop shops until i found one that seamed to realey know what they were doing. My boat now runs, WOT 28mph, cruses at 20mph at 3200rpm and 12-14 gph with full fishing gear and 130 gal gas. The prop is a progresive pich 14" pr...

Paul Thanks for the reply. The engine is a GM350. The starter repair shop did test it under a noload condition, but they also dissemblied the solenoid. They told me that the contacts were in good condition. They went ahead and cleaned and polished the electrical contacts. They allowed me to watch th...

Mac 32 I can only answer your question about your gas tanks. I own a F26 hardtop and last spring i had to replace my main gas tanks that developed a leak. In my investigation into aluminum tanks i discovered some alarming facts. One was that a large number were installed wrong. An aluminum tank has ...

I own a F26ft hard top with a mercruiser engine and last spring i had to pull the engine to replace the oilpan and flywheel cover. While the engine was out i desided to replace the starter, the orignal starter (CW) was mounted ahead of the flywheel next to the oilpan. I replaced it with a starter (C...