Trojan Boat Forum

will do...

good question... I am in the iddle of the installation - plan to run the duct work to the main salon right where you questioned. Hope this won't be a problem - but practically did not see any better location! Good luck

I plan to re-set the timing once I install the 2 4bl carbs I rebuilt this winter. Being new to twin inboards I was confused about the firing order being different on the two blocks and thought I was missing something - thanks for clearing that up! this is a great fowum and group - all of my posts ha...

While cleaning my distributors - they were rusty - after total dis-assembly of the above motor portion of the distributor, cleaning/polishing all of the pieces parts and re-assembly not sure if I re-assembled correctly - seemed to run alright at dock but I am fearful I may have re-assembled pcs. 180...

Anyone recommend one epoxy over another - It seems the West System and instructions on line are pretty user friendly - I am a rookie when it comes to fiberglass repairs - but am confident with wood working and repairs to wood stuff... I thought I would use this in the spring for sealing leaks and co...

it is in the same location - but there does not appear to be any access... the floor is a 12x12 wood tile on top of the floor material. I just acquired the boat this fall and I am planning to cut and install an access - I need to investigate the stringers in that area anyway...

Thanks for the pdf - My unit does have a rotating blower head. It has three options for the condensation pan water drainage - 1 plumb to the shower pump, 2 drain to a bilge to be pumped out (don' like), - 3 purchase a condensator which pumps the pan water out with the return seawater $135.00. My sho...

Self contained...

Self contained...

thanks for the info... I am looking at buying a "Mermaide 16500 BTU" unit. it is 19.5 Length, 13.75 Height, and 13.5 Width with left side blower port. I was afraid the top feed would not allow enough room for the seat bottom. Do you believe what I described would also work? My boat is a 19...

I want to install air on my trojan. My plan is to locate under seat in galley eating area. Is a right or left style a better choice to run duct work? Thanks!

thanks for the pointers! Will try cleaning the anti siphon. Any advise on how or where to dispose of 160 gal of gasoline?

Thanks again! Rick

Recent purchase of 1979 f32 with twin chry. history had very little hours for 4 yrs - old gas - Actions - new water seperators - new coil, wires, rotor, plugs - continues to stall once I idle about two miles out of channel and begin to accelerate running both engines on same tank right engine seems ...