Hi!
I believe I have the original Trim Tabs (Boat Leveler?) on our 1985 F-36. Diver told me I lost two bolts that mount the actuator to the actual trim tab. Does anyone know the length and diameter of these bolts? Thanks, Jim.
Bolt size on Trim Tab Cylinder Bracket
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
-
JimmyDutch
- Registered user
- Posts: 18
- Joined: Thu Jul 13, 2017 3:11 pm
- Location: Sequim, WA
Bolt size on Trim Tab Cylinder Bracket
1985 Trojan F36 Convertible 460
Twin 350 Crusaders
Twin 350 Crusaders
-
WayWeGo
- 2025 Gold Support
- Posts: 782
- Joined: Fri Feb 13, 2015 11:13 am
- Location: Oakton, VA / Rhode River - Chesapeake Bay
Re: Bolt size on Trim Tab Cylinder Bracket
I believe they are 1/4-20 about 1/2" long, but our boat is in the water about 90 minutes away. Please don't rely on this since I am only going by memory.
1975 F-36 Convertible
Twin Chrysler 440's
Twin Chrysler 440's
-
JimmyDutch
- Registered user
- Posts: 18
- Joined: Thu Jul 13, 2017 3:11 pm
- Location: Sequim, WA
Re: Bolt size on Trim Tab Cylinder Bracket
Thank you!
After posting I found a pretty good website, insta-trim.com and they list a bolt for the bracket. I think it is the right one, they list it as a SS 1/4 x 5/8 slotted bolt. Gunna get that size and hope the diver doesn't throw it at me! Thanks again for your help, Jim.
After posting I found a pretty good website, insta-trim.com and they list a bolt for the bracket. I think it is the right one, they list it as a SS 1/4 x 5/8 slotted bolt. Gunna get that size and hope the diver doesn't throw it at me! Thanks again for your help, Jim.
1985 Trojan F36 Convertible 460
Twin 350 Crusaders
Twin 350 Crusaders