swim platform dinghy storage
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
-
- Ultimate User
- Posts: 1320
- Joined: Sun Oct 05, 2008 8:45 pm
- Location: Black Creek, Florida
- Contact:
swim platform dinghy storage
I would like to store my watertender 9.4 dinghy on my swim platform, with davits (or chocks) and the dinghy leaning forward toward the transom. Can anyone tell me where to get the davits? Any pics out there too?
MY CURRENT FLEET
2003 KEY WEST 2020 WA
1978 14' ASHCRAFT SKIFF

2003 KEY WEST 2020 WA
1978 14' ASHCRAFT SKIFF

-
- Registered user
- Posts: 68
- Joined: Mon Apr 27, 2009 1:22 am
- Location: Philadelphia
Keep an eye out for used Weaver davits on Ebay or Craigslist. I got a set recently for $125. I looked at different types, but for my Trojan, I need the dink to sit on the back of the swim platform in order to get the right angle to lean against the transom - the Weaver seems to do this best. If you get them used, make sure you are getting the correct type (they make different types) and take note whether the rubber dink mounts are included and what condition they are in. Check out the site - http://store.weaverindustries.com/merch ... p=4&pid=25
The Weaver davits were mounted on my swim platform when I bought my boat. The previous owner had an inflatable that he stored on the swim platform. It held the inflatable perfectly.
(The inflatable didn't come with the boat, so I remover the brackets from the platform and no longer have them.)
(The inflatable didn't come with the boat, so I remover the brackets from the platform and no longer have them.)
Gerry
1979 F36 Twin Chryler 440's

1979 F36 Twin Chryler 440's

-
- Ultimate User
- Posts: 1320
- Joined: Sun Oct 05, 2008 8:45 pm
- Location: Black Creek, Florida
- Contact:
davits
Thank you all for the info. It seems as if Weaver is the only game in town for davits. I checked all over the web and Craigslist, and found some new ones on Ebay for about half of retail and got them with the buy it now dealio.
MY CURRENT FLEET
2003 KEY WEST 2020 WA
1978 14' ASHCRAFT SKIFF

2003 KEY WEST 2020 WA
1978 14' ASHCRAFT SKIFF

Weaver is what I use. I didn't want to drill more holes in the swim platform so I sandwiched the slats with stainless to get the strength from all the slats and put several attaching scews between the slats, easy removal with no extra holes or marks and fully adjustable. I did the same with the swim ladder.


1975 F-32 "SIMPLY BLESSED"
- ready123
- Ultimate User
- Posts: 1841
- Joined: Sat Nov 08, 2008 5:53 pm
- Location: Mactier, Ontario Canada
- Contact:
Re: swim platform dinghy storage
How about storing it horizontally? That allows you to use 4 stroke engines and leave them on the dinghy.foofer b wrote:I would like to store my watertender 9.4 dinghy on my swim platform, with davits (or chocks) and the dinghy leaning forward toward the transom. Can anyone tell me where to get the davits? Any pics out there too?
Look here:
http://www.hurleydavits.com/Davit.html
As setup on my boat with a Walker Bay and Yamaha 20HP

With no dinghy:

Last edited by ready123 on Fri May 29, 2009 5:44 pm, edited 1 time in total.
Michael
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
- ready123
- Ultimate User
- Posts: 1841
- Joined: Sat Nov 08, 2008 5:53 pm
- Location: Mactier, Ontario Canada
- Contact:
My platform is pretty narrow so I had to use the extension arms with the Hurley davits.... any narrower and you couldn't move about on my platform.
Is there really that much difference in price when you include the dinghy pads, davits and SS standoffs... when I priced mine they were pretty close. I was comparing new... I appreciate Weaver's will be more common used on eBay.
Is there really that much difference in price when you include the dinghy pads, davits and SS standoffs... when I priced mine they were pretty close. I was comparing new... I appreciate Weaver's will be more common used on eBay.
Michael
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
- ready123
- Ultimate User
- Posts: 1841
- Joined: Sat Nov 08, 2008 5:53 pm
- Location: Mactier, Ontario Canada
- Contact:
So you don't plan to leave the engine on? Taking it on and off each time gets very old for me....foofer b wrote:I don't plan on using stand offs unless it won't nest well against the transom.
Don't you have any concerns about the dinghy rubbing against the transom? Noise, damage... etc:
Michael
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL