Power Venter

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
JPLLC
Registered user
Posts: 3
Joined: Thu Jul 01, 2010 8:47 pm
Location: Williamstown, NJ
Contact:
Contact JPLLC

Power Venter

Post by JPLLC »

I have a bad engine/bilge power venter motor on my 1979 SE28 Sedan. I used to hear the motor screaming but could never figure out where it was coming from. Now it's completely dead and I don't know how to get to it. Can anyone tell me how to get at this motor?
John P, Williamstown, NJ
1979 SE28 Sedan
Twin 318 C Marines
leastwereoutthere
Top
wowzer52
Active User
Posts: 959
Joined: Sun Feb 03, 2008 1:21 pm
Location: Longview, Wa.

Post by wowzer52 »

You'll most likely have to follow the hoses from the bottom of the bilge to the bilge blower motor, unless someone on here with a 28 can chime in.
1975 F-32 "SIMPLY BLESSED"
Top
pnmudge
Registered user
Posts: 57
Joined: Sat Apr 18, 2009 7:11 pm
Location: Vancouver, BC

Post by pnmudge »

We replaced ours... they were on the starboard side, mounted to the hull, behind the plywood wall that makes up the back of the dinette bench. Disassembly required :)
F-28 1976
twin 318 Chrysler
Top
Dreamer
Registered user
Posts: 80
Joined: Tue Sep 04, 2007 4:41 pm
Location: Saugatuck Mi.
Contact:
Contact Dreamer

Post by Dreamer »

Mine has them mounted on both sides, mine are also behind the plywood. not real nice to get to.
Better than I deserve
Top
Post Reply

Return to “Trojan Boats Forum”