Hello all,
I have a soda blaster coming Monday to remove the bottom paint, boot stripe,engine room, lazzerette, bilge and window frames paint.
Does anyone have any practical experience they can lend to the conversation?
SRD
1980 F36
Soda blasting Monday
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
-
Struts and Rudders
- Sporadic User
- Posts: 182
- Joined: Thu Dec 30, 2010 11:34 pm
-
alexander38
- Ultimate User
- Posts: 3179
- Joined: Sat Sep 27, 2008 6:48 am
don't do it in your front yard...... 
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
-
Commissionpoint
- Active User
- Posts: 1197
- Joined: Wed Oct 05, 2011 11:59 pm
- Location: Diamond Point on Lake George, NY
-
Struts and Rudders
- Sporadic User
- Posts: 182
- Joined: Thu Dec 30, 2010 11:34 pm
Well soda blasting monday went off without a hitch.
I used:
Lake Norman Soda Blasting
Ron Bergman
He showed up on time and worked hard and his pricing was very fair.
Everything turned out awesome.
He is recommended based on my experience.
I will be posting some photos tomorrow
We did the entire bilge, machinery area, engineroom and lazzerate....which all now have clean surfaces ready for gelcoat.
I will have him back later for window frames and aft fuel tanks.
SRD
1980 F36
I used:
Lake Norman Soda Blasting
Ron Bergman
He showed up on time and worked hard and his pricing was very fair.
Everything turned out awesome.
He is recommended based on my experience.
I will be posting some photos tomorrow
We did the entire bilge, machinery area, engineroom and lazzerate....which all now have clean surfaces ready for gelcoat.
I will have him back later for window frames and aft fuel tanks.
SRD
1980 F36