Temperature Sender for 318

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
User avatar
The Dog House
Active User
Posts: 807
Joined: Mon Jan 09, 2012 6:51 am
Location: Bordentown, NJ

Temperature Sender for 318

Post by The Dog House »

I tried replacing the temperature sender on my 318 today with a Faria 1/4" NPT temperature sender, but the Faria sender was too long. The thread diameter was correct, but the sender that I took out was about half the length of the Faria sender. Do 318s require special temperature senders? I need a temperature sender that will fit in the 318 that uses American standard resistance values. Thanks for any help you can provide.
1993 Sea Ray 200 Overnighter OB with 1993 Mercury 150 hp Outboard
1979 Starcraft 14' Rowboat with 2011 Mercury 9.9 hp Outboard
Former boat: 1971 Trojan F26
Top
User avatar
prowlersfish
2025 Gold Support
2025 Gold Support
Posts: 12728
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Post by prowlersfish »

length should not be a issue as long as you have room for the sender
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
Top
Post Reply

Return to “Trojan Boats Forum”