Rickalan35 Trojan Yacht Pennant
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
- prowlersfish
- 2025 Gold Support
- Posts: 12723
- Joined: Sat Nov 05, 2005 6:56 pm
- Location: Lower Chesapeake Bay ,Va
-
- Sporadic User
- Posts: 191
- Joined: Thu Oct 25, 2007 4:10 pm
- Location: Sandusky, OH
- TADTOOMUCH
- Moderate User
- Posts: 526
- Joined: Thu Jul 12, 2007 9:58 am
- Location: S.W. Michigan
Penants
So has anyone heard from Jimini or Rickalan35 about their penants? It's been quiet on this subject. Hope all is well with Jimini.
Boat Name: A TAD TOO MUCH
Model: 1978 F-32 Sedan Cruiser
Engines: Twin Chry 360's 666 hrs original engines
2013 Mercury 300 Ocean Runner 9.9hp Merc 4 stroke
Model: 1978 F-32 Sedan Cruiser
Engines: Twin Chry 360's 666 hrs original engines
2013 Mercury 300 Ocean Runner 9.9hp Merc 4 stroke
- prowlersfish
- 2025 Gold Support
- Posts: 12723
- Joined: Sat Nov 05, 2005 6:56 pm
- Location: Lower Chesapeake Bay ,Va
The curse of the trojan pennant, you take orders then place your order and then you are never seen again . I think aliens are involved . or mabe a club of non trojan boat owners( with no pennant to call their own)
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat

Arrrrrrrrrr I suspect them darn Sea- ray owners blow a foul wind our direction 

Rick 1976 Trojan E-26 Express 351 FI
Info@emaltd.com
Info@emaltd.com
-
- Registered user
- Posts: 57
- Joined: Tue Jul 01, 2008 7:01 pm
- Location: Grand Haven, MI
LSP wrote:You mean to tell me, I went and bought a Trojan so I could buy a pennant and there isn't any?
LOL!


****************************************
1976 F-32 - twin 233hp Mercruisers
I've been told a boat is nothing more than a hole
in the water you throw money into. Meh
****************************************
1976 F-32 - twin 233hp Mercruisers
I've been told a boat is nothing more than a hole
in the water you throw money into. Meh
****************************************
- Stripermann2
- Ultimate User
- Posts: 3027
- Joined: Fri Jan 19, 2007 9:11 am
- Location: Solomon's Island, MD
Hey, just be thankful it wasn't a scam where you all sent money in and were taken like fools!
Seriously though, I'm sure Jimini will show back up with an explanation...I'm sure he feels bad about the timing. Wasn't there mention that he was ill? Ain't no Burgee worth one's discomfort.
Hopefully he has recovered or is in the process of recovery and we'll hear from him in the near future.

Seriously though, I'm sure Jimini will show back up with an explanation...I'm sure he feels bad about the timing. Wasn't there mention that he was ill? Ain't no Burgee worth one's discomfort.
Hopefully he has recovered or is in the process of recovery and we'll hear from him in the near future.

Jamie
1985 F-32 270 Crusaders
1988 Sea Ray 23 350 Merc.
Trojan. Enjoy the ride...
-I don't wanna hear anyone whine...Anymore!
-You might get there before me, but you still have to wait for me, for the fun to start!
1985 F-32 270 Crusaders
1988 Sea Ray 23 350 Merc.
Trojan. Enjoy the ride...
-I don't wanna hear anyone whine...Anymore!
-You might get there before me, but you still have to wait for me, for the fun to start!
-
- Moderate User
- Posts: 792
- Joined: Mon Feb 06, 2006 1:37 pm
- Location: smiths falls, ontario, canada
Re: Trojan Pennants.
At the outset, I purchased two nice, local, double sided polysester/nylon blend, embroidered, marina pennants
and used them as examples of the design and quality desired for the Trojan Pennant I ordered manufactured.
I spoke with the people at Weso on Monday and let them know that I'd like a prototype done off in a "timely" manner and they indicated that they would attend to that for me.
We currently have a long list of those indicating that they would desire a pennant should one become available. As these are being done at my cost it's really of no consequence to me if someone wants to remove their name from the list.
At the outset, I purchased two nice, local, double sided polysester/nylon blend, embroidered, marina pennants
and used them as examples of the design and quality desired for the Trojan Pennant I ordered manufactured.
I spoke with the people at Weso on Monday and let them know that I'd like a prototype done off in a "timely" manner and they indicated that they would attend to that for me.
We currently have a long list of those indicating that they would desire a pennant should one become available. As these are being done at my cost it's really of no consequence to me if someone wants to remove their name from the list.
Trojan 1994 370 Express, 502 Bluewaters
- prowlersfish
- 2025 Gold Support
- Posts: 12723
- Joined: Sat Nov 05, 2005 6:56 pm
- Location: Lower Chesapeake Bay ,Va
- TADTOOMUCH
- Moderate User
- Posts: 526
- Joined: Thu Jul 12, 2007 9:58 am
- Location: S.W. Michigan
A shot across the bow
I think a shot across the bow of those Sea Ray owners will give em a scare. I mean a shot of tequila of course.
Boat Name: A TAD TOO MUCH
Model: 1978 F-32 Sedan Cruiser
Engines: Twin Chry 360's 666 hrs original engines
2013 Mercury 300 Ocean Runner 9.9hp Merc 4 stroke
Model: 1978 F-32 Sedan Cruiser
Engines: Twin Chry 360's 666 hrs original engines
2013 Mercury 300 Ocean Runner 9.9hp Merc 4 stroke
-
- Sporadic User
- Posts: 191
- Joined: Thu Oct 25, 2007 4:10 pm
- Location: Sandusky, OH
Any idea on when the company will make the Trojan pennants, Rickalan? I'm still in the hunt, both with you and Jimini. I did put up State of Ohio (not OSU Buckeyes, although I did shake the hand of Woody Hayes once, while the other hand was pouring Ripple over his head!) pennant to hold down the fort until the real pennant(s), Trojan, can proudly wave there.
-
- Moderate User
- Posts: 792
- Joined: Mon Feb 06, 2006 1:37 pm
- Location: smiths falls, ontario, canada
Hi David,
I told them I'd like a sample pennant done for next week and they're going to try there best. These pennants will not fit their automatic machine and will all be handsewn. They have some neat older ladies working there and the pennants are a nice change of pace for them. They specialize in high end baby clothes.
So, next week I'll be inquiring as to their progress. I think that we all want them for THIS SEASON.
Thanks for asking
Rick
I told them I'd like a sample pennant done for next week and they're going to try there best. These pennants will not fit their automatic machine and will all be handsewn. They have some neat older ladies working there and the pennants are a nice change of pace for them. They specialize in high end baby clothes.
So, next week I'll be inquiring as to their progress. I think that we all want them for THIS SEASON.
Thanks for asking
Rick
Trojan 1994 370 Express, 502 Bluewaters
ricklan35 pennants
Hey..is it possible to get on the pennant waiting list. It would be appreciated.
Thanks...Expresso 8.6 meter
New mexico dispensaries
Thanks...Expresso 8.6 meter
________rickalan35 wrote:So far it's as follows:
Initial Order: 30 Pennants.
5 pennants for Trojans located at my own Marina (my Tri, a 1972 28 footer, 3 F32's) in Rideau Ferry, Ontario.... Rideau Lakes
1 pennant for Rick1954 of Waterford
1 pennant for Paul in Hampton, Va
1 pennant for David of Sandusky OH
1 pennant for the mysterious Chuck
1 pennant for Dean Price of Elbow, Sask (Dean I didn't know they had any water in Sask... send us all a pic to prove it...lol)
1 pennant for GaryGa in the Hamptons
1 pennant for Elevman of New Jersey (former spelling bee champion)
1 pennant for Scurvydog of no fixed address
1 pennant for THX with the 30 footer
1 pennant for RWS of Punta Gorda Fl
1 pennant for LandVF36 from Minnesota
1 pennant for TadTooMuch in SW Michigan
1 pennant for OOGTP in good old Hastings, On
1 pennant for MTWOLF with the '73 F-31
1 pennant for MATTSC
2 pennants for Don Lumber in Grand Haven
Thus 8 pennants remaining of initial order. (hopefully I haven't missed anyone)
1. When sample arrives, I'll post a couple of photos
2. Price will be at my cost
Cheers
Rick
_________________
New mexico dispensaries
Last edited by expresso on Thu Feb 17, 2011 7:36 pm, edited 1 time in total.