Page 2 of 3
Posted: Mon May 03, 2010 1:41 pm
by ready123
Nancy wrote:Do you think there's any water getting in where the helm console fastens to the sole?
Will look forward to the vent photos. Are those overhangs hollow?
No water entered around console, was thoroughly checked even with some test drill holes. Due to the camber of the bridge deck the only way that area gets wet is if there is no bimini or cover to protect it from rain. The sides and fore and aft edges of the bridge are exposed to the weather hence why they are more likely to suffer... it is unlikely that water within the deck would run uphill to under the console, it does run back at the sides of the bridge due to gravity though.
The overhangs have a space between them and the bridge floor which is a cap, an upside down bathtub based on how it was laid up. Since I have sealed the surround with 5200 I want that trapped airspace to breathe.
Posted: Mon May 03, 2010 9:15 pm
by Fishblues
I would like the FB seats, they look in good shape. Are there any tears and would you ship them.
Thanks,
Michael
Posted: Mon May 03, 2010 9:19 pm
by Fishblues
One more thing, do you have the hinges for the rails?
Posted: Mon May 03, 2010 9:25 pm
by ready123
Fishblues wrote:I would like the FB seats, they look in good shape. Are there any tears and would you ship them.
Thanks, Michael
Of course I can ship them as long as you pay.
Let's take this to email
ready123@rogers.com.
Where do you need them shipped to?
There are no tears... the piping along the bottom of one is pulling a way and just needs to be stapled back down.
Posted: Mon May 03, 2010 9:27 pm
by ready123
Fishblues wrote:One more thing, do you have the hinges for the rails?
The rails are full three piece... they have not been cut for the hinges. So they are just like the ones in your picture.
Part for sales
Posted: Tue May 04, 2010 10:52 am
by Dan Faith
Michael,
sent you both PM and E-mail not sure if the went.
Posted: Fri May 07, 2010 1:03 pm
by ready123
Nancy wrote:Will look forward to the vent photos. Are those overhangs hollow?
Vents...
These fill them:
And lastly the bench that is replacing the seats:
Posted: Fri May 07, 2010 1:19 pm
by Dan Faith
Great idea on the vents, how many did you put in? New seat looks great more storeage. I'll be in touch with you on the rails, checking schedule.
Dan
Posted: Fri May 07, 2010 2:19 pm
by ready123
3 each side... yeah the bench allows 2 of us to lay down on those cool days spring & fall to soak up the sun behind the glass enclosure.
No rush with the rails... they are at the back of my storage and all the boat cushions etc: don't come out till next week.
Posted: Fri May 07, 2010 7:45 pm
by Nancy
Thanks for the photos, Michael! Everything looks great!
Where did you find those vents?
Nancy
Posted: Fri May 07, 2010 9:55 pm
by ready123
Nancy wrote:Thanks for the photos, Michael! Everything looks great!
Where did you find those vents?
Nancy
Thanks for your praise...
Hardware store for the vents... they still have the label on so will make a note of the part number on the weekend.
is folding bench still available?
Posted: Tue May 11, 2010 3:29 pm
by crewedattempt
Am interested - is it still available? Can you tell me the dimensions? It would be going on an F31...thanks!
Posted: Wed May 12, 2010 7:03 am
by g36
hi
Vents for Nancy
Posted: Thu May 13, 2010 8:37 pm
by ready123
Re: is folding bench still available?
Posted: Thu May 13, 2010 8:38 pm
by ready123
crewedattempt wrote:Am interested - is it still available? Can you tell me the dimensions? It would be going on an F31...thanks!
Folding bench?
not in my for sale list.
