Page 2 of 2
Posted: Fri Sep 28, 2012 3:34 pm
by Mike Kulp
I think you are talking about the white plastic ones if you check West Marine or Defender for wiper motors the covers will be listed there as optional parts, I replaced all my motors and i think i gave the used covers to Aaron, I am not sure he ever used them.
Posted: Fri Sep 28, 2012 7:05 pm
by jhalb
I don't have covers on mine. I did remove and paint the motors and they look fine.
Posted: Sat Sep 29, 2012 9:32 am
by Natchamp
Nice looking 10M !!! Congrats on your new boat, you will love it.
Posted: Sat Sep 29, 2012 11:44 am
by Mike Kulp
I replaced the old motors with this style, they are wired with two speeds and auto park, it was a pain in the butt to wire.
Had to machine a plate between motor and wind shield frame to hide all the wires
Posted: Sat Sep 29, 2012 12:56 pm
by RWS
the wires are designed to run through the slot in the window frame extrusion.
However, on my model, they relied on th eactual frame for a ground which can cause problems with age.
I ran each wioer motor wore to a common heavy ground and also grounded the frame with a 10 guage wire to earth.
zero problems since doing so
RWS
Posted: Sat Sep 29, 2012 1:29 pm
by Mike Kulp
+1