Posted: Fri Mar 16, 2012 1:23 pm
Back from boat with more measurements. I have made a small drawing:
Hope, it will help.
--
Greetings - Heiner
Hope, it will help.
--
Greetings - Heiner
Ron
Trojan Boat Forum
Call BEACON MARINE @ 609-713-4602 -- For QUICK answers to your Trojan questions
https://www.trojanboats.net/wforum/
1976' Trojan F-32 Sedan - Looking for anchor replacement
Page 3 of 4
Posted: Fri Mar 16, 2012 6:20 pm
Machen Sie es wieder gutmacht oder macht es überhaupt nicht. Die Chancen, dass Sie eine genaue neue Ersetzung finden werden, die genau passen wird, sind nicht gut.
Ron
Ron
Posted: Fri Mar 16, 2012 6:34 pm
Ron I will take your word on that 
.
Its looking like the one you need is 94020 12H® I what to check one more thing.
.Its looking like the one you need is 94020 12H® I what to check one more thing.
Posted: Fri Mar 16, 2012 6:35 pm
prowlersfish wrote:Ron I will take your word on that
Its looking like the one you need is 94020 12H® I what to check one more thing.
I was gonna say "UUMMM YEA what he said!!!" Posted: Sat Mar 17, 2012 3:06 pm
Ron, Du hast recht aber vielleicht hat er Glueck!rbcool wrote:Machen Sie es wieder gutmacht oder macht es überhaupt nicht. Die Chancen, dass Sie eine genaue neue Ersetzung finden werden, die genau passen wird, sind nicht gut.
Ron
Posted: Sat Mar 17, 2012 4:47 pm
I would like to have 'Glueck' cause any other anchor can't replace the original one. The Danforth is the right for our muddy terrain.
Had a speech to our 'Harbour-Chief' and he' says Danforth will be the best.
--
Greetings - Heiner
Had a speech to our 'Harbour-Chief' and he' says Danforth will be the best.
--
Greetings - Heiner
Posted: Sun Mar 18, 2012 9:22 pm
Heiner - measured my anchor tonight, and think it (mostly) fits your measurements.
Danforth Super Hooker, 13 pound.
Fluke tips : 4: apart.
Base to end of flukes : about 18"
Fluke tips to end of shank : about 12"
Base to end of shank : about 28"
Good luck!
Danforth Super Hooker, 13 pound.
Fluke tips : 4: apart.
- 09a9b6ad.jpg (39.31 KiB) Viewed 2002 times
- 3e8881fe.jpg (39.1 KiB) Viewed 2002 times
Fluke tips to end of shank : about 12"
- 05393d25.jpg (35.7 KiB) Viewed 2002 times
Base to end of shank : about 28"
- 9fef73ac.jpg (37.15 KiB) Viewed 2002 times
- 62cbd034.jpg (52.98 KiB) Viewed 2002 times
- 5d647816.jpg (51.81 KiB) Viewed 2002 times
Good luck!
Posted: Sun Mar 18, 2012 9:38 pm
The 12H looks real close by the info I have . How ever I have a 12H and the messurments don't jive . the 12H I have is old so I will recheck
Posted: Mon Mar 19, 2012 1:09 pm
Hi David - thank you very much for your engagement - and: you get a hit 
The Danforth Super Hooker 13 will fit our chocks perfectly !
I've been to our dealer and we checked the measurements again - thats wat I was looking for. Now we can order it, and if that anchor is in stock in Italy, we will get it in around 10 days.
Quick enough - on April 4'th is splashing day.
--
Greetings - Heiner
The Danforth Super Hooker 13 will fit our chocks perfectly !
I've been to our dealer and we checked the measurements again - thats wat I was looking for. Now we can order it, and if that anchor is in stock in Italy, we will get it in around 10 days.
Quick enough - on April 4'th is splashing day.
--
Greetings - Heiner
Posted: Tue Mar 20, 2012 7:00 am
Glad you found one that would work ., By the numbers the 94020 12H® would work , But the older one I had did not match up to the drawing , Mostly it had changed . was going to try and find a new one to check but no need now .Tthat hooker looks good too.
Posted: Wed Mar 21, 2012 12:46 am
Hello my fellow Trojaners.
I sent someone a private message but the way this site works, I may have sent it three times.
I am seriously interested in acquiring a set of the toe stubber anchor holders from those of you who installed an anchor pulpit.
I need to replace a half missing part on my 78 F-30 plus I would like a second set as I do intend to do some serious anchoring and would like a 2nd set for my 2nd anchor.
I would love a pulpit bit in Illinois, they charge charge for every inch!!!!!
Next year, I will have to pay more due to my having ordered a custom made swim platform which will make my F-30 an F-33!!!!!!!
Lake Michigan is not a gentle giant so that is why I want two sets as I do not want to get up every ten minutes to see if I am floating to doom!
I sent someone a private message but the way this site works, I may have sent it three times.
I am seriously interested in acquiring a set of the toe stubber anchor holders from those of you who installed an anchor pulpit.
I need to replace a half missing part on my 78 F-30 plus I would like a second set as I do intend to do some serious anchoring and would like a 2nd set for my 2nd anchor.
I would love a pulpit bit in Illinois, they charge charge for every inch!!!!!
Next year, I will have to pay more due to my having ordered a custom made swim platform which will make my F-30 an F-33!!!!!!!
Lake Michigan is not a gentle giant so that is why I want two sets as I do not want to get up every ten minutes to see if I am floating to doom!
Posted: Wed Mar 21, 2012 12:52 am
I want to go with 2 anchors otherwise you will see on CNN some idiot's boat on Lake Shore Drive - "key music"
Posted: Wed Mar 21, 2012 11:23 am
I have the set from my F28, they are bronze not chrome and I am not going to reuse as will build a pulpit.
Posted: Thu Mar 22, 2012 3:21 pm
Posted: Thu Mar 22, 2012 5:49 pm
They look to be larger then what you have now .