Page 1 of 1
ID a Part Please
Posted: Wed Aug 23, 2017 1:05 am
by JimmyDutch
Hello. I'm trying to ID the yellowish, plastic item with the hose clamps and black hoses on either end and the wires coming out the side. This is on the PS of the I believe, original Onan 6.5 Generator. I
think it is part of the gen water cooling system. It is cracked and leaks when the gen is running. Thanks in advance, Jim.
- Gen Water Cooler Sys.jpg (124.27 KiB) Viewed 8829 times
Re: ID a Part Please
Posted: Wed Aug 23, 2017 11:23 am
by Brooks
I just saw one of these and wondered if they actually work...
https://aaamarine.com/corrosion-control ... ectrolysis
Maybe it's a variation of this thing - good luck
Brooks
Re: ID a Part Please
Posted: Wed Aug 23, 2017 12:44 pm
by JimmyDutch
Well that certainly looks like what it is… Thanks Brooks!
Re: ID a Part Please
Posted: Thu Aug 24, 2017 12:35 pm
by gettaway
not sure from your photo if this device is on the raw water intake line or the exhaust, but it kind of looks like a wet muffler with an over temp or water flow sensor
Re: ID a Part Please
Posted: Fri Aug 25, 2017 2:49 pm
by JimmyDutch
Hmmm... ok. Thanks Gettaway.
Re: ID a Part Please
Posted: Tue Aug 29, 2017 6:39 pm
by WayWeGo
Where do the wires lead to? That might help identifying it.
Re: ID a Part Please
Posted: Tue Aug 29, 2017 8:37 pm
by Misty
Sounds right. By the way "what's this thing?" would make a a fun folder of threads to start and maybe help others in the future.
Re: ID a Part Please
Posted: Sat Sep 02, 2017 2:03 pm
by rickalan35
I would say wet muffler