Page 1 of 1
one hot riser one cool
Posted: Fri Sep 19, 2008 9:25 pm
by Jezebel
Help me out guys...
I have one riser (port) that is cool (room temperature) and one (starboard) that is hot (i can put my hand on it for 5 seconds without burning me) I'm running a good temp on the gauge.... 160-175. I have a 74 trojan sea raider. 302 w/351 W, Ford Merc.
Thanks,
John
Posted: Fri Sep 19, 2008 9:58 pm
by prowlersfish
Sounds like one manafold is flowing more then the other . maybe one is pluged up or has a restiction in the hoses. Keep in mine it is not abnormal for one to run hotter then the other . A weak water pump impler can add to this some what . Try cleaning the manafolds and rissers
check the insides of the hoses and fittings for restictions , check the water pump impler ( if its been a few years I would change it )
Posted: Sat Sep 20, 2008 8:34 am
by willietrojan
Is your engine FWC or RWC
Posted: Sat Sep 20, 2008 8:56 am
by prowlersfish
Good question Willie . I was thinking Raw Water cooled Let me ask this is the engine is fresh water cooled are the manafolds fresh water cooled ? and if they are are the manafolds a diffrent temp or is it the risers ? (or both )
Posted: Sat Sep 20, 2008 10:45 am
by wowzer52
I had one manifold running hot so I took the riser off and poked around with a clothes hanger enough to knock some of the junk loose and put it back together and it has been running cool ever since. Very cost affective.
thanks
Posted: Mon Sep 22, 2008 1:59 pm
by Jezebel
I think it must be the riser... everything else is new.
Thanks again
RWC
Posted: Mon Sep 22, 2008 1:59 pm
by Jezebel
its all raw
Posted: Mon Sep 22, 2008 11:07 pm
by willietrojan
You most likely have a blockage in one of the water jackets of the riser. Just to be sure that it's not a weak water pump you might want to take the water supply hose off that feeds that side of engine and see what kind of water flow you getting.