Page 1 of 1
Picking up a parts boat, anyone need anything?
Posted: Sat Jan 24, 2009 12:30 pm
by Mikesboatsupply
Going to pick up a parts in the next few days. 1969 31' Trojan Sea Raider wood hull. We are planning on using one of the engines in another project but otherwise are for the most part going to gut her out. Anyone needs any parts drop me an email, going to list the bits and pieces on ebay but figured I would offer it up here first. Not looking to make a fortune just recoup some costs, let me know what you need and what its worth to ya and we will see if we have it in decent shape.
Boat has fully canvas that is supposedly in very good shape, and has twin 318's with velvet drives. Will fill in more information on whats what with it when we get back with her and verify the information that we have been given. If you are curious about a component let me know and I will get more info on that as well.
Posted: Sat Jan 24, 2009 5:36 pm
by AuxiliaryComms
Has it got the brackets for the swim platform in good condition?
Not sure yet what I could give you for them.
May be some other bits I might like to get off you.
Posted: Sun Jan 25, 2009 2:22 am
by Aviso Grille
how about a rudder, post a list when you get a chance..
trojan parts
Posted: Sun Jan 25, 2009 7:12 am
by aaronbocknek
if you are not using them, i would love the individual transom letters that say T R O J A N i would appreciate it.
aaron
parts
Posted: Sun Jan 25, 2009 9:49 am
by mytrojan
If you come across seat brackets of a helm seat. These attach the seat pole to the wall . I need two.
I have a picture to send- I'm not sure how to attach it here.
Posted: Sun Jan 25, 2009 1:02 pm
by gjrylands
Trojan Wall Mounting Brackets
I think these are the brackets.
Posted: Sun Jan 25, 2009 3:57 pm
by mtwolf
I could use the lower helm seats, brackets, Etc. Another words, everything for both sides.
John
Posted: Sun Jan 25, 2009 4:24 pm
by mr elevman
dose it have a fly bridge if so trans shifters and shifters from main helm
Posted: Sun Jan 25, 2009 11:40 pm
by 1967 seavoyager
Sea Raiders were not wood hulls. They were fiberglass hull / wood superstructure. Sea Sprites were all plywood, Sea Skiffs were lapstrake, Sea Voyagers were carvel planked ( smooth plank)
parts needed
Posted: Mon Jan 26, 2009 8:10 am
by TADTOOMUCH
I sent you an e-mail but here is what I am looking for.
I need the chrome hatch lever that locks the hatch down. I only need one. This is not the part that the wheel tightens against. It is the latch that has a pair that you tighten and flip up to secure the hatch when down.
I will be willing to pay up to $20.00 for it.
wall bracket
Posted: Mon Jan 26, 2009 8:53 am
by mytrojan
Posted: Mon Jan 26, 2009 11:39 am
by gjrylands
Is this what you are looking for?
Posted: Mon Jan 26, 2009 12:05 pm
by gjrylands
This is the helm seat bracket that mytrojan needs.
Posted: Mon Jan 26, 2009 1:30 pm
by Dan Faith
I AM LOOKING FOR THE HINGES AND LATCH FOR THE TEAK RAIL. I'M NOT SURE IF THAT MODEL HAS THEM, IF SO I COULD USE THEM I BELIEVE THEY ARE THE SAME AS ON THE F32
DAN
