Page 1 of 1

PRINCESS 3 BURNER RANGE PARTS THREAD

Posted: Thu Feb 05, 2009 7:55 am
by aaronbocknek
i too could use some parts for my 1976 model 33 princess 3 burner electric range w/ oven and rotisserie. i could also use the rotisserie assembly and spits if anyone is upgrading their galley, i'll gladly purchase these parts along with extra oven racks and the broiler pan. for some reason, the previous owner ''misplaced'' these items---how or why, i have no idea. suffice it to say though, i would like to make this range as complete as possible. i know that seaward has taken over production of the 'princess' range, but am unsure if any of the parts will fit. they have yet to get back to me via email or phone.
aaron

Posted: Fri Feb 06, 2009 10:34 am
by 1967 seavoyager
go to seawardproducts.com they have a dealer locator section on their site.

Posted: Fri Feb 06, 2009 12:08 pm
by jimmiedcharters
I will check my boats this weekend I may have parts as I dont use the stove.

stove

Posted: Sat Feb 07, 2009 4:51 am
by aaronbocknek
1967 seavoyager, i have tried, on several occasions to speak with the sales rep in my area and in other areas of the country that deal with seaward product to no avail. i have even personally contacted, or tried to contact, the service centers in the maryland region, and, again, all have been futile. they either will not respond to repeated voice mails or just do not bother returning phone calls. very frustrating to say the least.
i'll keep trying on this site though. someone, i am sure, will be able to assist at some point.
it's going to be in the high 50's here in baltimore today and i can't wait to get down to the boat this morning.
aaron [/quote]

Posted: Tue May 26, 2009 1:13 pm
by prowlersfish
Arron did you ever find parts for your stove ? if so where ?

Posted: Tue May 26, 2009 7:59 pm
by guglielmo6160
Aaron, I to need the spits, for the rotis,,, I thought the rotis wasnt working but it does, it just moves real slow, and its a pretty easy unit to remove and service,
Im guessing that regular rotis rods will fit, , we just have to cut them to size, I tryed to get the originals, but wasnt able to , so if you find them, before I do, let me know, in the mean time, Im going to go to Home Depot and see if I can find a generic rotis rod and make it work, would be cool to make shishkabobs,,,,,(is that spelled right?)

Posted: Tue May 26, 2009 11:51 pm
by 1967 seavoyager
Don't know if this helps but, Ballantyne RV in victor, ny is a seaward/princess dealer.