Page 1 of 1
Removing Rudders
Posted: Fri Jun 05, 2009 6:47 pm
by lbswaff
Hello I have messed with these rudders for hours and hours. I pulled the roll pins out and I cannot get the shaft collar to come off. I have managed to get it to slide down by beating on it but cant get it up. Any suggestions would be great. Thanks
Posted: Fri Jun 05, 2009 11:40 pm
by prowlersfish
Try sanding the shaft some above the shaft collar or you can cut the collar. if your replacing the rudder you can cut the shaft ( like I did yesterday . ) why are you replacing the Rudders ?
Posted: Sat Jun 06, 2009 7:23 am
by prowlersfish
and Lots of WD40 will help