Page 1 of 1
Power Venter
Posted: Mon Aug 02, 2010 10:31 pm
by JPLLC
I have a bad engine/bilge power venter motor on my 1979 SE28 Sedan. I used to hear the motor screaming but could never figure out where it was coming from. Now it's completely dead and I don't know how to get to it. Can anyone tell me how to get at this motor?
Posted: Wed Aug 04, 2010 8:29 pm
by wowzer52
You'll most likely have to follow the hoses from the bottom of the bilge to the bilge blower motor, unless someone on here with a 28 can chime in.
Posted: Thu Aug 05, 2010 2:06 am
by pnmudge
We replaced ours... they were on the starboard side, mounted to the hull, behind the plywood wall that makes up the back of the dinette bench. Disassembly required
Posted: Thu Aug 05, 2010 9:28 pm
by Dreamer
Mine has them mounted on both sides, mine are also behind the plywood. not real nice to get to.