Page 1 of 3
80's Trojan decals
Posted: Mon Dec 27, 2010 5:47 pm
by JGedridge
Hey all,
The previous owner re-striped my boat and took off the original trojan decal on the side of the boat. It was not the kind that is sold on this website. It is the type with the blocks on either side and it says, "Trojan" and the helmet as a decal. Where on earth can i find this again??????? I tried to go on ebay for them, but no goal.
Any luck with you 80's trojan owners?
Joe
Posted: Tue Dec 28, 2010 8:14 am
by prowlersfish
you could contact Bob or marine tech , do you have a photo of the one your looking for ?
Posted: Tue Dec 28, 2010 9:11 am
by Peter
could also try ebay...
Posted: Tue Dec 28, 2010 9:34 am
by prowlersfish
He said he did
Posted: Tue Dec 28, 2010 9:36 am
by Peter
opps..Guess I'll go back to lurking...
Posted: Tue Dec 28, 2010 9:40 am
by gettaway
are they like this?
Posted: Tue Dec 28, 2010 9:53 am
by prowlersfish
those are from the 70s ( maybe early 80s ?? also) the ones he wants are decals I belive .
If you can take a photo of one from another trojan maybe you could have it made ?
Posted: Tue Dec 28, 2010 9:58 am
by gettaway
I have a few of these in a "decal" form, to replcae the metal ones
Posted: Tue Dec 28, 2010 10:01 am
by prowlersfish
The style he is looking for is a lot different going by photos of the mid 80s tri.
Posted: Tue Dec 28, 2010 10:07 am
by gettaway
maybe the black larger font "Trojan"
Posted: Tue Dec 28, 2010 12:34 pm
by captainmaniac
I have never seen a place to get replacements. If you got a photo of one, you may be able to use it as a template to either paint it on the boat, or cut yourself a version out of tape... consider it a DIY craft project.
Posted: Tue Dec 28, 2010 12:44 pm
by prowlersfish
You can see the style used in this photo of Aarons boat
http://s1103.photobucket.com/albums/g47 ... icabin.jpg
Posted: Tue Dec 28, 2010 12:52 pm
by Torcan
here is a place that will make them for you which i found
and doesn't seem to be very expensive as well
just upload the artwork, good photo and they will do the rest,
click on the boat section
http://new.speedysigns.com/lettering/
Posted: Tue Dec 28, 2010 3:47 pm
by larglo
Not to change the subject,,,but speaking of lettering, I'm wanting to put the name of our boat on the stern. I have looked at the custom made lettering that peal, and stick on, but a little costly.
I was thinking of buying wood letters, then make a wood plaque, clue the letters on to it and screw the plaque to the stern. Does this sound to weird? Would finish with marine varnish.
How did some of you who named their boat,,,do it?
Larry
Posted: Tue Dec 28, 2010 4:35 pm
by prowlersfish
Seen it on trawlers looks ok , also done painted/ decal letters on wood plague looks good too
I had a decal made for my boat and put it on the stern
Word of advice on naming a boat ,Don't ask for advice ! ( on pickling a name) The answers are never pretty , funny some times , but not nice most times
