Page 1 of 1
20 X 17 Bronze prop RH turn 1 3/8 shaft
Posted: Sat Aug 06, 2011 9:27 am
by fbpage
Looking for a bronze RH 20 X 17 for my 85 Trojan Convertible 36. Anyone know of anyone who has one in stock or any ideas. thanks.
It is a 3 blade and off a 350 Crusader 454 330hp Gas 4000 rpm max
Posted: Sat Aug 06, 2011 4:36 pm
by prowlersfish
Try Bob at Beacon marine site sponsor , are you sure its a 20 X17 ?
Posted: Sat Aug 06, 2011 9:12 pm
by fbpage
Thanks -- the marina told me 20 X 17.5 -- so maybe could be a 20 X 18 I guess. Will talk to Beacon.
Posted: Sun Aug 07, 2011 7:45 pm
by Allen Sr
I have an 84 F-36 convertible with 454 (350hp) crusaders running 20x20 props. The size should be stamped on the props. I would have them double check the markings.
Posted: Sun Aug 07, 2011 7:57 pm
by prowlersfish
I thought the 17" pitch seemed small but it could have a different gear then yours .
Props
Posted: Sun Aug 07, 2011 10:14 pm
by fbpage
Thanks for the help guys. It is stamped on their as a 20 X 17.5 RH turn with a 1 3/8" shaft. My velvet drive is 1.91 to 1. I have a 1985 F35 Convertible twin 454's but 330hp. I hope to get one tomorrow somewhere and have the old one reworked as a spare.
thanks again for all the help
"Worth the Weight" 1985 F36 Convertible GAS