Page 1 of 1
87 Trojan 10.8m
Posted: Thu Aug 11, 2011 9:25 pm
by zchris
I would like to know the size of the propeller for the 1987 Trojan 10.8m sportfishing boat. Thank You.
Posted: Fri Aug 12, 2011 5:52 am
by RWS
I suggest you contact Bob at Beacon MArine, the sponsor of this website, or John Leed at MarineTech.
Give them your hull number and they should be able to help you out.
RWS
Posted: Fri Aug 12, 2011 6:47 am
by prowlersfish
Remember what was put on new may not be the best , how you use and load the the boat can affect the prop you need . most boats come from the factory slight over propped for real life.
Posted: Fri Aug 12, 2011 9:33 am
by zchris
OK but the boat is not my yet , i would like bay them its without propellers and ruder so i want to know how much wile coast me repair and i do not know the hull number
Posted: Fri Aug 12, 2011 9:59 am
by RWS
Sounds like she was run aground.
Is it a salvage prurchase?
I can tell yopu what my props are, but your requirememt may be different based on which hull layout you have, the midcabin version orthe express version.
Between the mid owners and the express owners, we should be able to get you pretty darn close.
Send some photos and we can identify which version you have.
RWS
Posted: Sat Aug 13, 2011 8:05 am
by BobCT
Is this boat in Milford CT? Similar one was recently listed also missing rudder and props.
Bob