Page 1 of 1
sliding glass door f-36
Posted: Fri May 04, 2007 9:20 pm
by vandukw
my sliding door to salon does not want to slide, I think it has lost a wheel or it has a flat spot on one....How do you get the door out to check or replace slider wheels? I cant push it up high enough to get it off track and out? anyone had this prob.???
Posted: Sun May 06, 2007 7:19 am
by Buckknekkid
use a bottle jack to lift the center of the flybridge Should clear by a quarter of an inch. the rollers are steel and not generally available.
Posted: Sun May 06, 2007 10:25 am
by prowlersfish
I think Bob sells the wheel kits here (
http://www.trojanboats.net )
Posted: Mon May 07, 2007 3:21 pm
by Safari
Underneath the slider is a molded aluminum piece that has 4 screws holding it in. When you remove the screws, pull the piece towards you - The door will come off with the piece (might need 2 people for this one). When its off, pull the long aluminum bracket off to expose wheels. Get the right wheels!
Posted: Tue May 08, 2007 9:45 am
by mintregila
Check in Home Depot. You will pay $60 for a set from Bob and $12 there.