Trojan Boat Forum

Posted: **Mon Sep 12, 2011 4:53 pm**

Hey All,

Towing the boat to the ramp at 60+ mph when a Turkey Buzzard slamed my starboard windscreen! Needless to say I am now looking for:

1: A trick to getting the frame of the header, screws corroded, only 2" clearance to the screws from the Hardtop Brow.
2: Ant leeds on where I might find a replacemet window with frame & hindge?

1976 30' Sedan Cruiser - Starboard Side

Thanks, Abster

Posted: **Mon Sep 12, 2011 7:51 pm**

Turkey Buzzard for dinner!

Posted: **Sat Sep 17, 2011 1:07 pm**

I always try tapping the screw driver with a hammer to free up the screw. or you can buy the screw remover tool to back out the screws. Definately eitherway tap the screws to help loosen the corrosion.

Posted: **Sun Sep 18, 2011 11:13 am**

this for Reelfishin, I have tried to send MKD Genny manuals, just now and back in may. Your ISP will not let the large files throug. If you would email me your mailing address I will burn them to a disk.

Let me know something as I did not get a response previously to a mail address request.

Larry

Trojan Boat Forum

Bird Strike on my 30 Sedan !!!!

Bird Strike on my 30 Sedan !!!!