Trojan Boat Forum

Good evening everyone
I just became a new member so I hope you'll be gentle on me since I'm a virgin to this trojan club. I own 1996 390 express Trojan & I decided to investigate why my wipers weren't working. Well it wasn't pretty, they were all seized in their enclosed pockets under the windshield. When I bought this boat it also didn't come with the wiper arms. Does anybody have any suggestion on were to find some(motors & arms)?
Thank you in advance
Pete

Welcome aboard Pete !!!
There are a few members here from the GTA, myself am up at Scarborough Bluffs CBYC along with another member here Rooferdave
There is also a member down in Burlington.

As for your wiper motor and arms, you could always contact the owner of this site, Beacon Marine, ..Bob has everything, or knows where to get it as far as Trojans go.

There will be probably a few other great folks chime in with alternative suggestions as well.

Again...Welcome Aboard

Welcome to the forum

Welcome to the forum and the Trojan Family

Check with Bob at Beacon . however that is a Carver Built boat so you maybe able to get them from Carver .But I don't see a problem as the wiper arms are pretty universal for moat boats .

I bought new blades from Beacon, only place I could find one that fit on the Trojan Wiper Arm.

Welcome

Welcome! you will find this to be a friendly and valuable place to be.........John

Gentlemen (& ladies)
Thank you, for your kind words & acceptance as a member. I once received an advertisement from Beacon. I think you may be right about selling parts for the older style( no offense) Trojan's. I wonder if Carver retained the same parts into the later years. It seems the arms have to be specific hole size & style( there not round). I'm currently & regrettably docked at Port credit Harbour Marina. Anyways thank you again, I hope we come up with a solution.

Give Bob a call and see what he has to say ,

welcome pete i am a new owner also of a 95 390 - i have my boat pretty much gutted at the moment and i have the port side wiper motor and arm in my garage . if you don t get info you need let me know snd i ll check for any numbers you may need . i also have easy access to other motors if needed. mine also are froze now haven t looked at them yet if you come up with a good option on the motors please let me know also thanks wayne

Thanks Wayne
I'm about to shot some pictures back to Jamie Keetch, He his the Director of parts for Carver. He mentioned that they do have a huge assortment of parts still left over from the buy out. The problem is that there not # & labeled on shelves, so it's more a show & tell (& a long wait). I appreciate the offer Wayne, I might need the numbers off the Motors & can you see the name of the manufacture of the arms? If this all fails, I will have to create my own setup.
Thanks again
Pete

hi pete - i have the port wiper motor at home so heres all the info on it . this is the port wiper it says 85 degrees on the electric motor itself it has 6577520 another set mo25wj / it says 12v with a manufacture date of3/25/03 so im guessing its been replaced already then another sticker says kit #wwj12pt good luck and if it will help i can send pic of wiper arms after i figure out how lol let me know if u want me to try

also if you could i would like the number and location of the carver parts guy you found thanks wayne

hey pete- i found my manuel with every origanal part number you may need- wiper arm 24" pantograph quantity 2 part #7336502 wiper arm 28" pantograph quantity 1 part#7336504 wiper blade 20" 3710 quantity 3 part #7336503 wiper kit i'm guessing are the motors 3710 quantity 3 part # 7336508 if you need any more numbers just let me know good luck

1995 390 express wrote:hey pete- i found my manuel with every origanal part number you may need- wiper arm 24" pantograph quantity 2 part #7336502 wiper arm 28" pantograph quantity 1 part#7336504 wiper blade 20" 3710 quantity 3 part #7336503 wiper kit i'm guessing are the motors 3710 quantity 3 part # 7336508 if you need any more numbers just let me know good luck

Would you happen to have the numbers to next weeks Lottery handy?

Kidding aside, it's the information, or someone that has the information to share that makes this forum so great.

OH MY GOD!!!! That is beautiful, I can't thank you enough. I hope these parts or part # didn't change over a year or 2 in production. I'll copy & paste to my buddy at Carvers & see what he comes up with.

I can't thank you enough guy's
Pete