Page 1 of 1
Bomar style hatch
Posted: Mon Dec 05, 2011 5:42 am
by Allen Sr
Does anyone here know if it is possible to replace the glass in the hatches. Have one that is cracked and once in a while will leak a little at the crack. I haven't been able to find an exact replacement for it. Also in the process od removing the other two to clean up,re paint and re seal to deck.
Posted: Mon Dec 05, 2011 7:32 am
by prowlersfish
Allen On mine you can but yours maybe different got a photo ?
Posted: Mon Dec 05, 2011 9:56 am
by Stripermann2
If they're like my hatches, I have 3 of them, complete, as spares.
But I'm thinking you have the different ones. Not the hatches with the glass screwed down around the perimeters, on top off the frames...
Posted: Mon Dec 05, 2011 6:45 pm
by Allen Sr
My perimeter screws down and the glass top seperates from the perimeter with 4 screws. I have one hatch in my truck will try to get pics and post them tommorow. They are 20 x 20.
Posted: Tue Dec 06, 2011 7:20 pm
by Allen Sr
Posted: Tue Dec 06, 2011 8:01 pm
by Commissionpoint
I am not familiar with that style as I am a pre 1980 guy. Are those OE or replacement? How about a new 20x20 unit?
http://www.defender.com/product.jsp?pat ... 1&id=48279
Just a thought. They are a bit spendy. Then again so are repairs from water intrusion. Catch 22 I suppose.
Copy and paste that link to make it work.
Posted: Wed Dec 07, 2011 8:58 am
by Stripermann2
Then click on size 20X20.
http://www.jamestowndistributors.com/us ... 900+Series
Here's the company product line of hatches. Maybe give them a call and see if they'll replace or service the hatch...
http://www.pompanette.com/pompweb.nsf/7 ... enDocument
Posted: Sat Dec 17, 2011 5:55 am
by alexander38
Hey Allen, I just got 4 new hatches from great lakes skipper made by Jim Black inc. they're real nice looking and look like the older 80's style Bomar/Gray's that alot boat co's used then... but have up dated handles and stuff and the centers are real tempered glass not plastic
and you can't beat the price...
Posted: Sat Dec 17, 2011 7:39 am
by Allen Sr
Tony, those hatches look great but unfortunately won't work in my application.
They have a 1.5"drop internally and mine have to be a flush mount. I did locate a company in Ft. Lauderdale that makes replacement lenses for the hatch. $70 for the replacement and free shipping lower 48. I may do all three hatches at that price and be scratch free!
Thanks for the tip thats how I finally located them. Going to call them monday since I am out of work 'recovering'.
