Page 1 of 1
LED Interior lights
Posted: Fri Feb 24, 2012 10:57 am
by jddens
I have 5 of these overhead lights and would like to change to LED bulbs. Current they use a very small 12V Halagon blub. I can't see any numbers on the blub. Anybody changed these to LED?...........Thanks............John
Posted: Fri Feb 24, 2012 4:55 pm
by S.A.M.
Posted: Fri Feb 24, 2012 10:11 pm
by Big D
The key is the type of connection pin configuration you have in the fixture; there is more than one type used. If you can't get a number and are unfamiliar with the pin type, take the bulb to any store that sells them and get the pin configuration from the packaging, then it's a matter of using that pin type when ordering the LED replacement.
Posted: Fri Feb 24, 2012 11:07 pm
by 1967 seavoyager
I found them at the camper store. (Camping World) Even 12v Compact Flourescents.
Posted: Sat Feb 25, 2012 12:13 am
by jddens
OK, thanks....very small blub with two pins about 1/4 inch apart.....I'll take the blub to west marine and pay 2X for LED's.............then I'll know what I'm doing going forward.............Thank........John
Posted: Sat Feb 25, 2012 7:02 am
by Lawman
John, should be 1156 bulb. Bought some cheap on e-bay.
Posted: Sat Feb 25, 2012 11:25 am
by Molly Too
I bought mine from
http://eversale.com/.
Mel
Posted: Sat Feb 25, 2012 12:19 pm
by jddens
Thanks All........I've got some options now.............John
Posted: Fri Mar 02, 2012 12:31 am
by lawyerdave71
Great tips - keep them flowing!!