Page 1 of 1
Deck Core Material
Posted: Thu Mar 15, 2012 1:07 pm
by jjstar
Need some idea about what material to use for deck core. I know balsa is the best, however I not forgiving if one make mistakes.
Posted: Thu Mar 15, 2012 1:14 pm
by Stripermann2
Posted: Thu Mar 15, 2012 3:40 pm
by k9th
Looks like that is your first post jjstar so welcome aboard.
Posted: Thu Mar 15, 2012 7:04 pm
by ready123
Posted: Thu Mar 15, 2012 9:46 pm
by Big D
Welcome aboard jjstar. You're gonna get a lot of info on this forum. Bunch of helpful guys and gals here. So where you from and what do ya got?
Posted: Fri Mar 16, 2012 7:15 am
by rossjo
A good alternative that won't absorb moisture or rot is Divinycell.
Divinycell is a semi-rigid PVC foam used as a sandwich core material when strength, stiffness and low weight is desired. It has excellent insulating properties and a closed-cell structure that makes it impervious to water.
Divinycell is a rigid PVC foam with a closed, inert gas filled cellular structure. Produced in a range of densities and thicknesses to meet required specifications. Available as plain sheet, perforated or scored, as contourable scorred and scrimed backed, and as custom planks.
I've used successfully on several projects over the years.
https://www.google.com/search?q=Divincy ... 42&bih=398
Posted: Fri Mar 16, 2012 9:27 am
by aweimer
VERY nice work! Impressive. My bow deck is in need of some repair too, been thinking about that, but it seems to be a huge task.
Posted: Fri Mar 16, 2012 9:43 am
by g36
aweimer wrote: My bow deck is in need of some repair too, been thinking about that, but it seems to be a huge task.
then.... it becomes how do you go about trying to try to match up the repaired area to the "trojan" non skid design of the deck. any ideas?
Posted: Fri Mar 16, 2012 9:53 am
by ready123
g36 wrote:then.... it becomes how do you go about trying to try to match up the repaired area to the "trojan" non skid design of the deck. any ideas?
Life is a compromise, I think colour match is more important than skid pattern because one should be happier that the repaired weak points are gone.
If the match is really a problem for you one can always redo the top gel/non skid pattern surface on the whole deck
Or maybe pay a pro who can match the non skid pattern.... be thankful that Trojans are earlier than the grooved pads used in the late 80's and on which have been through many non skid pattern/score shape changes, try matching those
Posted: Fri Mar 16, 2012 10:08 am
by aweimer
Is the finished product just gel coat or did you paint?
Deck Core Material
Posted: Fri Mar 16, 2012 10:16 am
by jjstar
Thanks for the welcome. I have been putting this off for a few years. I have to take care of this before i lose my deck contour. Any pros or cons on Epoxy's, vinylester, or other
Posted: Fri Mar 16, 2012 4:37 pm
by ready123
aweimer wrote:Is the finished product just gel coat or did you paint?
If that is to me... gel coat applied with a stipple roller for non skid.
