Page 1 of 1
1991 12 meter, many electric buttons at helm sticking
Posted: Tue May 29, 2012 7:29 pm
by Partick
Does anyone have a place to buy the OEM buttons for my boat? Last year all were fine, it came out of storage and 1/3 of them stick or dont work. There are other switches around the boat that are likely from the same manufacturer that have problems as well.
Thanks...desperate, our season is short in MN>
Patrick
Posted: Tue May 29, 2012 8:01 pm
by prowlersfish
Beacon marine would be my first stop ( sponser of the forum )
Posted: Tue May 29, 2012 8:10 pm
by prowlersfish
you could try WD-40 to see if it will will some switchs
Posted: Tue May 29, 2012 10:34 pm
by k9th
+1 and welcome aboard
Posted: Tue May 29, 2012 10:59 pm
by jddens
+2 on the WD-40............and Welcome!
Posted: Wed May 30, 2012 12:52 pm
by S.A.M.
I used silicone spray. It' safer on plastic and nylon.
Posted: Wed May 30, 2012 3:38 pm
by Mike Kulp
+1 Silicone spray worked good.