Page 1 of 1
318 Motor Mounts
Posted: Wed Jun 13, 2012 7:02 pm
by jefflaw35
New motor and tranny came with different mounts, Velvets can be swaped but my Old motor mounts are trashed, New ones are of a different angle and shape. I have measured the best I could but still unclear if I am able to Fill the old stringer holes with epoxy and go with the new off shaped/angled mounts in new drilled location. Or should I replace with the same I had before. I think Larry has an F-28, is it possible that the stringers are a different shape or thickness leading to a different mount design? Motor mounts dont look to be to cheap, but not super expensive, would just have to find them. Im ready to start building but need to get it on a proper bench that is setup like the boat, maybe someone has experenced using different mounts than they took out
Posted: Wed Jun 13, 2012 8:21 pm
by trojanmanXS
jeff I just saw a set of those on ebay, not sure if there the ones your looking for or not but this guy had a bunch of trojan parts
Posted: Wed Jun 13, 2012 10:33 pm
by jefflaw35
ok ill go hunting again. Didnt see much yesterday, you have a link?
Posted: Sat Jun 16, 2012 12:03 pm
by jefflaw35
think I found this guy Tman. The only motor mounts he has are the exact ones I need! 99$
http://www.ebay.com/itm/FRONT-MOTOR-MOU ... ar&vxp=mtr
Is this him?
Posted: Mon Jun 18, 2012 9:25 pm
by trojanmanXS
yeah thats was him , sorry I searched the hell out of it after I posted here to get the link but kept getting nothing , I dont know how I happened on the site but yes thats him , did you get them ?
Posted: Mon Jun 18, 2012 11:09 pm
by jefflaw35
no because the same night I was going to order them, someone from the site emailed me saying he had 2 I could have. Just waiting to see if the side that I need is his good one. Good people here behind the scenes!! Ebay guys is still for sale, I spoke to him too.
Posted: Tue Jun 19, 2012 2:00 pm
by larryeddington
Jeff those look pretty good, I have another set on this old engine but don't think they are better than the ones on the engine I sent you.
The F28 has angle iron that bolts on the side of the stringers with bolts through the stringers and mounts into slots which gives a lot of adjustment.
Posted: Tue Jun 19, 2012 9:42 pm
by jefflaw35
Yea just didnt think I could use yours, They are in perfect shape, just way different. I got a new sent from someone!!
Posted: Sat Jun 30, 2012 6:37 pm
by jefflaw35
received 2 perfectly good motor mounts in the mail today!!! Thanks again.... I can get this beast up on the stand now.... Another thank you card is in the mail. People here are great!!!!