Page 1 of 1
1976 Trojan 26.6'
Posted: Wed Nov 21, 2012 10:40 pm
by Chitimacha
I am looking at the purchase of a 1976 26.6; dont have the hull number yet does anyone have any info on this boat also it has a crack head what would be the estimate to fix this problem
Thanks in advance
Posted: Wed Nov 21, 2012 11:02 pm
by prowlersfish
Welcome .
Most likely a F the hull ID numbers will tell the story . . Cost of replacing a head ? the will vary on what engine you have and other factors , other damaged parts rusty bolts etc . and of course the labor rate in your area .
why do you think it has a cracked head ?
Posted: Thu Nov 22, 2012 8:31 am
by Allen Sr
Welcome to the forum. More info would be nice. Hull id no., engine make/size,the more info the better we can answer your questions.
Posted: Thu Nov 22, 2012 9:46 am
by k9th
Welcome aboard!
Posted: Thu Nov 22, 2012 12:29 pm
by jddens
Welcome.....odds are if you have a cracked head and want to replace it you probably should consider a total rebuild.........John
Posted: Thu Nov 22, 2012 12:58 pm
by Vitaliy
thats assuming that we are talking about the engine that is...
Posted: Fri Nov 23, 2012 8:34 am
by aaronbocknek
Vitaliy wrote:thats assuming that we are talking about the engine that is...
i caught that too vitaliy. 
1976 Trojan 26.4'
Posted: Mon Nov 26, 2012 6:20 am
by Chitimacha
I have the info now can you tell me where I can find info on this boat
1976 Trojan 26.4'
Boat # MD8832-2
Hull # TRJ062080176
Model # 261-6210
Thanks
Posted: Mon Nov 26, 2012 6:47 am
by prowlersfish
You have a 1976 F26 10.5' beam approx dry weigh of 5450 lbs 27" draft .
the most common engine was the Chrysler 318 but there were other options ( mercruser )and being 35 years old may have been repowerd , If for some reason your having troulde ID ing the engine a photo would help
Most the info you need is available here so ask away . Of course when asking refer to it being a 76 F26. A owners manual is available thru Beacon marine .