Page 1 of 1

Call out to Bob CT for info.

Posted: Sun Mar 24, 2013 5:30 pm
by koviak
Bob, I remember a post some time back where you had replaced both of your shift cables. Do you still have the info. on these, mine have taken a shift :D
and I need to replace. Did not see any markings on the case hoping you could help. Thanks, Dennis

Re: Call out to Bob CT for info.

Posted: Mon Mar 25, 2013 8:08 pm
by yorklyn
dennis,
Measure the length of your old cables (I believe all 4 cables are different lengths) . You can use any 33C cable or the xtream 3300 teleflex. I'm going to replace mine with the "red jacket" teleflex cables. You reuse the old linkage and simply screw it on the new cables.