Windshield Wiper Blade For F26

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
User avatar
The Dog House
Active User
Posts: 807
Joined: Mon Jan 09, 2012 6:51 am
Location: Bordentown, NJ

Windshield Wiper Blade For F26

Post by The Dog House »

My windshield wiper blade is in need of replacement. Does anyone know where I can buy a replacement for a 1971 F26? Thanks for any info you can provide.
1993 Sea Ray 200 Overnighter OB with 1993 Mercury 150 hp Outboard
1979 Starcraft 14' Rowboat with 2011 Mercury 9.9 hp Outboard
Former boat: 1971 Trojan F26
User avatar
ready123
Ultimate User
Posts: 1841
Joined: Sat Nov 08, 2008 5:53 pm
Location: Mactier, Ontario Canada
Contact:

Re: Windshield Wiper Blade For F26

Post by ready123 »

Where I got mine.... courtesy Aaron
viewtopic.php?f=1&t=7937&p=81139&hilit= ... des#p81139
Michael
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
User avatar
K4282
Moderate User
Posts: 355
Joined: Thu Dec 27, 2012 2:12 pm
Location: Bullock Cove, RI

Re: Windshield Wiper Blade For F26

Post by K4282 »

im looking for 3 motors and wipers for my F32, someone removed them for some reason
User avatar
Bob Giaier
Sporadic User
Posts: 197
Joined: Thu Sep 17, 2009 12:42 pm
Location: Clarkston, Michigan

Re: Windshield Wiper Blade For F26

Post by Bob Giaier »

I have a 73 tri cabin and I removed the rubber extruded blade and found the same rubber blade at Auto zone. I think it was an Anco. I removed the new extruded rubber blade from the wiper itself and used sissors to cut it to the correct length. I then assembled it into the old blade housing. It took some time and patience, but it worked for me.
Post Reply