Page 1 of 2
Chaning the cabin door lock on 1990 12M International
Posted: Thu Jul 30, 2015 5:21 pm
by tcollins2
I just bought the boat and I think I want to change the lock on the door. Has anyone done this yet. Can I just change the lock cylinder or do I replace the entire lock?
Re: Chaning the cabin door lock on 1990 12M International
Posted: Thu Jul 30, 2015 7:24 pm
by prowlersfish
Most times you can change the cylinder ( not sure your exact lock ) You can also have it re keyed
Re: Chaning the cabin door lock on 1990 12M International
Posted: Fri Jul 31, 2015 1:03 pm
by S.A.M.
If it's a sliding door like on my '90 10M, it's nothing more than a patio sliding door lock. I went to lowes and bought a complete kit.
Re: Chaning the cabin door lock on 1990 12M International
Posted: Fri Jul 31, 2015 9:18 pm
by Flyboy
My 10 Meter does not have a sliding door latch from Home Depot. Mine is broken and I would like to replace it, but I have no idea how to get it off or change the cylinder, neither does Bob at Beacon Marine. If you figure it out let me know. Good Luck.
Re: Chaning the cabin door lock on 1990 12M International
Posted: Sat Aug 01, 2015 7:57 am
by RWS
Flyboy wrote:My 10 Meter does not have a sliding door latch from Home Depot. Mine is broken and I would like to replace it, but I have no idea how to get it off or change the cylinder, neither does Bob at Beacon Marine. If you figure it out let me know. Good Luck.
===================================================================================
I'd wager that John Leed could help, or even have the part(s) needed
RWS
Re: Chaning the cabin door lock on 1990 12M International
Posted: Sat Aug 01, 2015 8:06 am
by Flyboy
Don't want to highjack the post, but how do I get ahold of John Leads.
Re: Chaning the cabin door lock on 1990 12M International
Posted: Sat Aug 01, 2015 9:27 am
by prowlersfish
Check with Beacon marine (site sponsor ) he also can get what john has ( They deal with each other ) Bob is easier to get hold of
Re: Chaning the cabin door lock on 1990 12M International
Posted: Sat Aug 01, 2015 11:08 am
by Flyboy
Okay,
I talked to Beacon Bob and they got the drawings out and they have no idea how to get the latch off either.
Will keep trying.
Re: Chaning the cabin door lock on 1990 12M International
Posted: Sat Aug 01, 2015 3:31 pm
by prowlersfish
Can you post some photos ?
Re: Chaning the cabin door lock on 1990 12M International
Posted: Sat Aug 01, 2015 8:14 pm
by bjanakos
^^^^
Usually you take the latch cover off and there are some set screws inside.
Re: Chaning the cabin door lock on 1990 12M International
Posted: Sun Aug 02, 2015 9:43 pm
by Flyboy
Re: Chaning the cabin door lock on 1990 12M International
Posted: Tue Aug 25, 2015 2:16 pm
by tcollins2
I took your advice, took the lock off and gave it to a locksmith for a day. He rekeyed it for $20. He said it's a very simple lock cylinder.
Re: Chaning the cabin door lock on 1990 12M International
Posted: Mon Nov 02, 2015 4:14 pm
by McMomX6
tcollins2 wrote:I took your advice, took the lock off and gave it to a locksmith for a day. He rekeyed it for $20. He said it's a very simple lock cylinder.
I have the same lock on my '86 Mediterranean sportfisher and the lock no longer works (it's just stuck fast)...I can't get the lock out either. How did you manage to get it all apart? Thank you in advance!
Re: Chaning the cabin door lock on 1990 12M International
Posted: Wed Nov 04, 2015 2:15 pm
by tcollins2
There were two screws on the inside of the door that I took off and that was it.
Re: Chaning the cabin door lock on 1990 12M International
Posted: Wed Nov 04, 2015 4:40 pm
by Flyboy
Did it look like the lock above?
